Buying Guide

ManualsBrandsKlein Tools ManualsElectrician's Needle Nose PliersElectrician's Insulated 8 in. Long Nose Side-Cutting Pliers - Heavy Duty

Insulated Screwdrivers - Round-Shank

Includes core insulated screwdriver features plus:

•

Klein’s profilated Phillips-tip provides a more consistent geometric

symmetry than conventional Phillips-tip screwdrivers

•

Square-Recess tips are perfect for electrical, telephone and work in

recessed holes and other tight spaces

603-7-INS

Cat. No. Overall Length Shank Type Shank Length Tip Type Weight

6334INS 7-3/4" (196.9 mm) Round 4" (101.6 mm) #1 Phillips 0.13 lb (0.06 kg)

603-4-INS 8-5/16" (211.1 mm) Round 4" (101.6 mm) #2 Phillips 0.20 lb (0.09 kg)

6037INS 11-5/16" (287.3 mm) Round 7" (177.8 mm) #2 Phillips 0.25 lb (0.11 kg)

6337INS 12-3/8" (314.3 mm) Round 7" (177.8 mm) #3 Phillips 0.40 lb (0.18 kg)

607-3-INS 6-3/4" (171.5 mm) Round 3" (76.2 mm) 3/32" (2.4 mm) Cabinet Tip 0.12 lb (0.05 kg)

612-4-INS 7-3/4" (196.9 mm) Round 4" (101.6 mm) 1/8" (3.2 mm) Cabinet Tip 0.13 lb (0.06 kg)

601-4-INS 7-3/4" (196.9 mm) Round 4" (101.6 mm) 3/16" (4.8 mm) Cabinet Tip 0.13 lb (0.06 kg)

601-7-INS 10-3/4" (273.1 mm) Round 7" (177.8 mm) 3/16" (4.8 mm) Cabinet Tip 0.17 lb (0.08 kg)

602-4-INS 8-5/16" (211.1 mm) Round 4" (101.6 mm) 1/4" (6.4 mm) Cabinet Tip 0.20 lb (0.09 kg)

605-7-INS 11-5/16" (287.3 mm) Round 7" (177.8 mm) 1/4" (6.4 mm) Cabinet Tip 0.25 lb (0.11 kg)

602-7-INS 12-3/8" (314.3 mm) Round 7" (177.8 mm) 5/16" (7.9 mm) Cabinet Tip 0.40 lb (0.18 kg)

602-8-INS 13-3/8" (339.7 mm) Round 8" (203.2 mm) 3/8" (9.5 mm) Cabinet Tip 0.50 lb (0.23 kg)

661-4-INS 8-5/16" (211.1 mm) Round 4" (101.6 mm) #1 Square 0.20 lb (0.09 kg)

661-7-INS 11-5/16" (287.3 mm) Round 7" (177.8 mm) #1 Square 0.20 lb (0.09 kg)

662-4-INS 8-5/16" (211.1 mm) Round 4" (101.6 mm) #2 Square 0.20 lb (0.09 kg)

662-7-INS 11-5/16" (287.3 mm) Round 7" (177.8 mm) #2 Square 0.20 lb (0.09 kg)

Insulated Screwdrivers and Nut Drivers

WARNING: Do NOT touch uninsulated portion of the tool or any

conductive object when either might contact an energized source.

WARNING:

Wear approved eye protection. Always inspect your tools before use.

Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white

layer shows through orange layer.

WARNING: Because moisture, films, or other surface contaminants are conductive,

Klein insulated tools must be kept clean, dry, and free of any surface contaminants.

WARNING: Only use tools that are marked with the official international 1000-volt

rating symbol shown below, if there is any chance

that the tools will make contact with an energized source.

WARNING: Whenever possible, always de-energize lines and equipment prior to

working on or around them. Klein insulated tools are designed only to reduce the chance

of injury where the tool may make contact with an energized source.

Product numbers with the INS suffix contain these warnings and must

be understood.

Tip-Ident

quickly

identifies nut driver size

Cushion-Grip handles

for greater torque and comfort

Durable, two layer,

molded insulation

Bright orange outer coating

is flame and impact resistant

Thick, exceptionally tough, high-dielectric

white inner coating is bonded to the tool

Klein insulated tools meet or exceed the

IEC 60900 and ASTM F1505 standards,

for insulated tools, and are clearly marked

with the official 1000-volt rating symbol

FORGED STEEL

from Klein's US-made, proprietary blend

Insulated Tools

See page 295 for additional information on warnings.