Use and Care Manual

Insert top shank of the climber with sleeve into tunnel slot opening

at the bottom edge of the pad. NOTE: Squeezing the tunnel from

the sides will aid in pushing the climber through the pad.

6 Continue pushing the climber through the tunnel until the

metal retaining bar is aligned with the sleeve loop.

Climber sleeve loop properly aligned with the retaining bar.

7 Feeding the Klein Kord

retaining strap through the climber

sleeve loop.

Push the retaining strap and retaining bar through the climber

sleeve loop.

8 Pull the retaining strap completely through the sleeve loop

and retaining bar. Secure the Velcro

hook end to the Velcro

loops on the pad.

1 Step into the climber and pad assembly.

2 Secure the ankle straps.

4. DONNING THE ASSEMBLED HYDRA-COOL™ PAD

AND CLIMBER TO YOUR LEG