Product Brochure

Flex Bit Augers
•
Used to drill holes through wood within a wall
•
Tapered back for easy bit retrieval
•
Spring steel shaft resists deformation
•
Screw point tip pulls the bit through wood
•
Hole in tip allows for use with wire or cable pulling grip
53719
Cat. No. Length Weight
53716 3/4" x 54" (19.1 x 1371.6 mm 1.0 lbs. (0.45 kg)
53717 3/4" x 54" (19.1 x 1371.6 mm 1.0 lbs. (0.45 kg)
53718 9/16" (14.3 mm) x 54" (1371.6 mm) 1.0 lbs. (0.45 kg)
53719 3/4" x 54" (19.1 x 1371.6 mm 2.0 lbs. (0.91 kg)
53751 3/4" x 54" (19.1 x 1371.6 mm 2.0 lbs. (0.91 kg)
53720 1" x 54" (25.4 x 1371.6 mm) 2.0 lbs. (0.91 kg)
53720
53716
53718
Flex Bit Extensions
•
Connects to the end of a flex bit and extends the length
53722
Flex Bit Placement Tool
•
For use with flexible drill bits
•
Positions flexible drill bits horizontally or vertically within a wall
•
Cushion Grip handle for non-slip comfort
•
Folding design stores more compactly than standard tool
53715SEN
Cat. No. Length Weight
53715SEN 11" (279.4 mm) 1.0 lbs. (0.45 kg)
Pulling Grips
•
Used to pull wire or cable through walls
•
Pulling grip attaches to the hole in the tip of the flex bit;
wire mesh holds the wire during the pull
•
Swivel end helps reduce twisting
Cat. No. Capacity Maximum Safe Load Weight
KPS050SEN 1/2" to 9/16" (12.7 to 14.3 mm) 100 lbs. (45 kg) 1.1 lbs. (0.50 kg)
KPS075SEN 3/4" to 1" (19.1 to 25.4 mm) 185 lbs. (84 kg) 1.8 lbs. (0.82 kg)
WARNING: Do not exceed maximum safe load as listed on the label
attached to the product.
WARNING: Always match proper size and type of grip to application.
WARNING: Always inspect equipment before use.
KPS050SEN
KPS075SEN
Cat. No. For Use With Connection Diameter Length Weight
53722 3/4" (19.1 mm) and Larger 5/8" (15.9 mm) 54" (1371.6 mm) 1.0 lbs. (0.45 kg)
53723 9/16" (14.3 mm) and Smaller 7/16" (11.1 mm) 54" (1371.6 mm) 1.0 lbs. (0.45 kg)
Flexible Drill Bits
Pulling Grips
See page 310 for additional information on warnings.
www.kleintools.com
238
Holemaking Products & Accessories
NOTE: Read and follow safety instructions in power tool owner's manual.