Product Brochure

Why is it important?
In private industry, falling objects accounted for 10% of worker fatalities in 2013 and are the
third leading cause of disabling workplace injuries. In 2012, falling objects caused 18% of
contractor deaths, a 7% increase from 2011.
OSHA ranks being "struck by objects" as the third leading cause of disabling workplace injuries.
Klein Tools' growing line of tethers and tools for Work@Height are designed to protect
workers on the job site as well as their tools.
WARNINGS:
• Inspect for wear before each use.
• Do not use for human support.
• Never connect over 5 lbs. (2.3 kg) to a person.
• Do not use around moving or rotating equipment.
WARNINGS:
• Tethers extend to anywhere from 3.5' to 5' (1.3 m to 1.5 m).
Rig to avoid contact with objects below.
• Always ensure cinch remains snug while in use.
• Always attach carabiner end to anchor point.
• Do not attach tether back onto itself.
• Do not tie knots in tether.
Tool Tether
•
Keep your tools close at hand when working at height
•
Cat. No. TT2 hastriple-locking carabiner for additional security
TT1
Cat. No. Max. Load Capacity Relaxed Length Stretched Length Weight
TT1 10 lbs. (4.5 kg) 32" (812.8 mm) 60" (1524.0 mm) 3.5 oz. (99 g)
TT2 15 lbs. (6.8 kg) 32" (812.8 mm) 51" (1295.4 mm) 1.6 oz. (45 g)
TT2
NEW!
NEW!
Standard Bull Pins
•
Machined from quality alloy steel
•
Heat-treated for strength, black finish for rust resistance
(except Cat. No. 3259TTS)
•
Cat. No. 3259TTS has stainless steel finish
3252
Cat. No. Top Diameter Point Diameter Length Weight
3251 1-1/16" (27.0 mm) 0.375" (9.5 mm) 15" (381.0 mm) 2.5 lbs. (1.13 kg)
3252 1-3/16" (30.2 mm) 7/16" (11.1 mm) 15" (381.0 mm) 3.1 lbs. (1.41 kg)
3257 1-1/16" (27.0 mm) 0.375" (9.5 mm) 12" (304.8 mm) 1.7 lbs. (0.77 kg)
3258 1-3/16" (30.2 mm) 7/16" (11.1 mm) 12" (304.8 mm) 2.1 lbs. (0.95 kg)
3259 1-5/16" (33.3 mm) 7/16" (11.1 mm) 12" (304.8 mm) 2.5 lbs. (1.13 kg)
3265 1-1/4" (31.8 mm) 7/16" (11.1 mm) 12" (304.8 mm) 2.5 lbs. (1.13 kg)
Broad Head Bull Pins with Tether Hole
3259TT 1-5/16" (33.3 mm) 7/16" (11.1 mm) 12" (304.8 mm) 2.5 lbs. (1.13 kg)
3259TTS 1-5/16" (33.3 mm) 7/16" (11.1 mm) 12" (304.8 mm) 2.5 lbs. (1.13 kg)
Broad Head Bull Pin
•
Forged, heat-treated bull pin increases efficiency by
providing a larger striking surface
•
Angled head and smooth blending of radii increase
strength and reduce the danger of chipping
•
Below the head, squared-off shoulders have been forged to provide
a surface for applying wrench to loosen wedged bull pins
•
Added resistance to "mushrooming" permits much longer use than
conventional designs and the even taper reduces binding and hang-up
•
Cat. Nos. 3256TT and 3255TT feature tether hole for working at height
3259TTS
3255
3255TT
Cat. No. Top Diameter Point Diameter Length Weight
3255 1-1/4" (31.8 mm) 0.313" (7.9 mm) 13-3/4" (349.3 mm) 2.9 lbs. (1.32 kg)
3256 1-1/16" (27.0 mm) 1/4" (6.4 mm) 10" (254.0 mm) 1.6 lbs. (0.73 kg)
Broad Head Bull Pins with Tether Hole
3255TT 1-1/4" (31.8 mm) 0.313" (7.9 mm) 13-3/4" (349.3 mm) 2.8 lbs. (1.27 kg)
3256TT 1-1/16" (27.0 mm) 1/4" (6.4 mm) 10" (254.0 mm) 1.5 lbs. (0.68 kg)
Work @ Height Tools
Bull Pins
See page 310 for additional information on warnings.
www.kleintools.com
300
Steel & Concrete Construction Tools
WARNING: Always wear approved personal protective equipment.