MSDS

MATERIAL SAFETY DATA SHEET
1. American Polywater Corporation
11222 - 60th Street North
P.O. Box 53
Stillwater, MN 55082 USA
Phone: [phone]
Fax: [phone]
Emergency Number: 1-651-430-2270
Product Name: Klein Clear Pulling
Lubricant (51028)
Date Reviewed: August 11, 2009
Reviewed By: S. H. Dahlke
2. HAZARDOUS INGREDIENTS
This product contains no reportable hazardous components under 29 CFR 1910.1200. There are no OSHA or ACGIH
threshold limit values for the product or any of its ingredients.
All components are listed on the TSCA inventory.
3. HAZARDS IDENTIFICATION
***Emergency Overview***
Low Solids waterbased lubricant. Clear gel
Lubricant is electrically conductive when applied. Dry from conductor before energizing circuit. In case of eye
contact, flush eyes with water. Industrial use only. Very slippery if spilled.
Eye Contact: Direct eye contact may cause eye irritation.
Skin Contact: This product has low skin irritation potential. There is no dermal toxicity hazard.
Inhalation (Breathing): No inhalation hazard expected with water vapor.
Ingestion (Swallowing): This product has low ingestion hazard.
Carcinogenic Status: This substance has not been identified as a carcinogen or probable carcinogen by NTP, IARC
or OSHA, nor have any of its components.
4. FIRST AID
Eye Contact: Flush eyes with a large quantity of water for 15 minutes. If irritation continues, seek medical attention.
Skin Contact: If skin becomes irritated, wash area thoroughly with soap and water. If irritation continues, seek
medical attention.
Inhalation (Breathing): No first aid expected to be required. Not an inhalation hazard.
Ingestion (Swallowing): No first aid expected to be required. If difficulties arise, contact a physician.
5. FIRE AND EXPLOSION HAZARD
Flash Point: None Flammable Limits: Product is not flammable.
Extinguishing Media: Does not apply.
Special Procedures: Does not apply.
Unusual Hazards: Sealed container can build up pressure when exposed to high heat. Cool containers with water.
Hazardous Decomposition Products: High temperature steam, potentially carbon monoxide and carbon dioxide.
6. ACCIDENTAL RELEASE MEASURES
Klein Clear Pulling Lubricant is extremely slippery. It should be washed, swept, or squeegeed from floor using wet
mops. Oxidizing agents, such as household bleach, can be used to eliminate the slippery character. Outside, spills
should be covered with sand, dirt, gravel or calcium chloride.
7. HANDLING AND STORAGE
Keep product containers closed when not in use. Avoid spills and clean them up immediately when they occur.
Product is very slippery.
8. CONTROL MEASURES