Buying Guide

High-Leverage Side-Cutting Pliers - Fish Tape Pulling
Additional Features:
•
Easily pulls 1/8" or 1/4" flat steel fish tape without damaging the tape
•
High-leverage design. Rivet is closer to the cutting edge for 46% greater
cutting and gripping power than other pliers designs
•
Streamlined design
•
Cat. No. J2000-9NECRTP crimps non-insulated connectors, lugs, and terminals
D213-9NETP
Cat. No. Nose Type Overall Length Jaw Length Jaw Width Jaw Thickness Knife Length Handle Finish Handle Color Weight
D213-9NETP New England 9-3/8" (238.1 mm) 1-19/32" (40.5 mm) 1-1/4" (31.8 mm) 5/8" (15.9 mm) 25/32" (19.8 mm) Plastic-Dipped Dark Blue 1.1 lbs. (0.50 kg)
Journeyman
TM
Series – Dual-material handles
J213-9NETP New England 9-1/2" (241.3 mm) 1-19/32" (40.5 mm) 1-1/4" (31.8 mm) 5/8" (15.9 mm) 25/32" (19.8 mm) Journeyman Dark Blue/Black 1.1 lbs. (0.50 kg)
2000 Series* – Heavy-duty cutting knives
D2000-9NETP New England 9-3/8" (238.1 mm) 1-19/32" (40.5 mm) 1-1/4" (31.8 mm) 5/8" (15.9 mm) 25/32" (19.8 mm) Plastic-Dipped Royal Blue 1.1 lbs. (0.50 kg)
Journeyman
TM
2000 Series* – Dual-material handles
J2000-9NETP New England 9-1/2" (241.3 mm) 1-19/32" (40.5 mm) 1-1/4" (31.8 mm) 5/8" (15.9 mm) 25/32" (19.8 mm) Journeyman Light Blue/Black 1.1 lbs. (0.50 kg)
J2000-9NECRTP New England 9-1/2" (241.3 mm) 1-19/32" (40.5 mm) 1-1/4" (31.8 mm) 5/8" (15.9 mm) 25/32" (19.8 mm) Journeyman Blue/Black 1.1 lbs. (0.50 kg)
*Cuts ACSR, screws, nails, and most hardened wire. Features combination polished and black-oxide finish.
Conduit Locknut Wrench
•
Easily attach locknuts in tight or deep cut-in boxes
•
For 1/2" and 3/4" connectors
•
Direct-drive heads rotate each other when twisted
•
Heavy-duty steel construction enables needed torque to loosen or tighten connectors
•
Perfect for remodel work where box is filled with existing wires
Cat. No. Fitting Size Overall Length Weight
56999 1/2" and 3/4" 9" (228.6 mm) 11.2 oz. (318 g)
US Patent pending
56999
Conduit Locknut and Reaming Pliers
•
Tightens 1/2" (13 mm) and 3/4" (19 mm) EMT or 1/2" (13 mm) rigid locknuts
•
Fits liquid tight fittings and caps
•
Reams and deburrs both inside and outside of conduit
•
Knurled jaws at nose tip pull wire or fish tape
•
Machined nose fits snugly into locknut wings
Tightens
Bodies & Caps
Cuchillas
Couteaux
Tightens
Locknuts
Cuchillas
Couteaux
D333-8
Cat. No. Overall Length Jaw Length Jaw Width Jaw Thickness Point Thickness Handle Finish Handle Color Weight
D333-8 7-3/4" (196.9 mm) 1-5/8" (41.3 mm) 15/16" (23.8 mm) 1/2" (12.7 mm) 3/16" (4.8 mm) Plastic-Dipped Yellow 8.8 oz. (249 g)
Conduit-Fitting and Reaming Screwdriver
•
Hooded-blade design keeps tip from slipping out of screws, especially when
tightening hard-to-reach conduit fittings. Thicker hood is designed for rugged use
•
Reams and smooths 1/2" (13 mm), 3/4" (19 mm), and 1" (25 mm) thin-wall
conduit ends to protect wire and permit correct installation of fittings
•
Reams both the inside and outside of the conduit at the same time
•
Longer Cushion-Grip handle provides comfort and more torque for reaming
•
Replaceable reaming blade is now held in place with a 1/6" (1.5 mm) set screw
85191
Cat. No. Tip Size Shank Length Overall Length Weight
85191 5/16" (7.9 mm) 2-1/2" (63.5 mm) 7-1/2" (190.5 mm) 8.0 oz. (227 g)
19353 Conduit Reamer Replacement Blade 0.16 oz. (4.5 g)
Conduit Tools
See page 310 for additional information on warnings.
www.kleintools.com
129
Wire Pulling & Conduit Tools