Buying Guide
Table Of Contents
- Introduction
- Magnetizer/Demagnetizer
- Cushion-Grip Screwdrivers
- Multi-Bit Cushion-Grip Screwdrivers/Nut Drivers
- Magnetic Screwdriver Bit Sets
- Replacement Parts
- Plastic-Handle Screwdrivers
- Pocket-Clip
- Magnetic
- Slotted Screw-Holding
- Phillips Screw-Holding
- Impact and Torque Drivers
- Cushion-Grip Nut Drivers
- Plastic-Handle Nut Drivers
- Tapping Tools
- Scratch Awls
- Conduit Reamers
- Power Driver Bits
- Power Nut Drivers
- Magnetic Hex Drivers
- Drill/Tap/Deburr Set
Phillips-Tip Screw-Holding Screwdrivers
•
Positive gripping action holds and starts Phillips screws in awkward, hard-to-reach places
•
Blade separates to hold the fastener
•
Not designed for torquing or tightening
K16
Cat. No. Overall Length Shank Type Tip Type Weight
K14 5" (127.0 mm) Round Phillips 0.80 oz (22.7 g)
K16 7" (177.8 mm) Round Phillips 0.80 oz (22.7 g)
K19 9" (228.6 mm) Round Phillips 0.80 oz (22.7 g)
57032
Reversible Impact-Driver Set
•
Rugged, hand-impact driver turns rusted, frozen, or other stubborn screws
•
Can also be used with 3/8" square-drive impact sockets
•
Internal, spring-loaded, helical design transforms the impact of a hammer blow to
up to 200 ft.-lbs. of shock torque
•
Easily reverses for tightening or loosening screws
•
Constructed of high-grade alloy steel that has been heat-treated for added strength
•
Reclosable, seal-tight vinyl pouch with hang-up grommet
70220
Cat. No. Phillips Bits Nut Driver Sizes Slotted Bits Included Weight
70220 #2 and #4 5/16" 5/16" (7.9 mm) and 1/2" (12.7 mm) 3/8" (9.5 mm) Square Drive fitting Adapter 2.2 lb (1.0 kg)
Torque Screwdriver Set
•
Compact, easy to use set includes the Torque Screwdriver, a 6-piece bit set
and a rugged case with foam inserts for a tight, organized fit
•
Increased usability and readability plus a wider torque range (5-40 in. lbs)
•
Tri-lobular design with a textured finish for better grip
•
Lightweight, aluminum frame
•
N.I.S.T. traceable calibration certificate
•
Set includes six 3-1/2" (89 mm) power drivers and a 1/4" nut driver
70229
BITS FOR IMPACT
DRIVER SET
Cat. No. Included Weight
57032 Phillips: #1 and #2;
Slotted: 3/16" (4.8 mm) and 1/4" (6.4 mm);
Square: #1 and #2 and 1/4" Nut Driver
1.0 lb (0.5 kg)
Screw-Holding Screwdrivers
Impact and Torque Drivers
Screwdrivers, Nut Drivers and Accessories
See page 310 for additional information on warnings.
63
www.kleintools.com