Specification Sheet

www.kleintools.com
66
Screwdrivers, Nut Drivers & Accessories
All dimensions are in inches and (millimeters).
Rapi-Driv
TM
Cushion-Grip Screwdrivers
67100
Interchangeable Rapi-Driv
TM
Additional Features:
•
Interchangeable bit holder allows quick switching between
tip styles and works with other standard size bits.
•
Crank-action handle allows you to spin screws fast with one hand.
•
Blast finish bit provides firm grip on fasteners to reduce cam out.
Cat. No. Interchangeable Tip Types Shaft Length Overall Length Weight (lbs.)
67100 3/16" (5 mm) slotted, # 2 Phillips 6" (152 mm) 9-3/4" (248 mm) .26
2-in-1 Replacement Bit
Cat. No. Fits Description Quantity Weight (lbs.)
67101
2-in-1 Rapi-Driv
TM
, 10-in-1,
11-in-1 and 10-Fold™
3/16" (5 mm) slotted, # 2 Phillips
replacement bit
contains 2 bits
.012
Conduit Reamers
Conduit-Fitting and Reaming Screwdriver
Additional Features:
•
Hooded-blade design keeps tip from slipping out of screws,
especially when tightening hard-to-reach conduit fittings.
Thicker hood is designed for rugged use.
•
Reams and smooths 1/2" (13 mm), 3/4" (19 mm), and 1" (25 mm) thin-wall
conduit ends to protect wire and permit correct installation of fittings.
•
Reams both the inside and outside of the conduit at the same time.
•
Replaceable reaming blade is now held in place with a 1/16" (1.5 mm) set screw.
85191
Cat. No. Tip Size Shank Length Overall Length Weight (lbs.)
85191 5/16" (8 mm) 2-1/2" (64 mm) 7-1/2" (191 mm) .50
19353 conduit reamer replacement blade kit .01
Power Conduit Reamer
Cat. No. Description Weight (lbs.)
85091 conduit reamer drill head for 1/2" (13 mm), 3/4" (19 mm), 1" (25 mm) conduit .33 lbs.
19353 conduit reamer replacement blade .01 lbs.
SQ2-1-15 #2 square recess replacement bit, 15-pack .01 lbs.
85091
•
Ream 1/2" (13 mm), 3/4" (19 mm), and 1" (25 mm) conduit and install fittings
in a fraction of the time.
•
Designed to fit into power drill chucks and quick release adapters; impact ready.
•
Includes precision engineered replaceable reaming blade.
•
Replacement blades are available and the only approved blade for use in this tool.
•
Replacement bits are available but any standard 1/4" hex bit will work.
Conduit Reamer
Cat. No. Conduit Capacity Weight (lbs.)
19352 1/2" (13 mm), 3/4" (19 mm), 1" (25 mm) .20
19353 conduit reamer replacement blade kit for 19352 .01
19352
•
Locks onto screwdrivers; reams and smooths thin-wall conduit.
•
Reams ID and OD at the same time.
•
Two set-screws for round- and square-shank screwdrivers.
•
Fits up to 3/8" (10 mm) keystone-tip screwdrivers.
•
NOT for use on power tools.
NOTE : Read and follow safety instructions in power tool owner’s manual.
SWITCH DRIVESWITCH DRIVE
S Y S T E MS Y S T E M
SWITCH DRIVE
S Y S T E MS Y S T E M
IMPACT RATED!
See page 296 for additional information on warnings.