Specification Sheet

www.kleintools.com
7373
Screwdrivers, Nut Drivers
& Accessories
All dimensions are in inches and (millimeters).
3-Piece Slotted Plastic Handle
Screw-Holding Screwdriver Set
•
Not designed for torquing or tightening.
Cat. No. Set Contains Weight (lbs.)
SK234 .40
Cat.
No.
Tip
Size
Shank
Size
K23 3/16" (5 mm) 3" (76 mm)
K34 1/4" (6 mm) 4" (102 mm)
K46 5/16" (8 mm) 8" 152 mm)
SK234
Screw-Holding Screwdrivers
†
Precision blade for use with small precision screws. Blade thickness
of .028" expanding to .045".
‡
Blade thickness of .043" expanding to .085".
Note: K21 and K23 have pocket clips.
K36
Cat.
No.
Tip
Size
Shank
Length
Overall
Length
Weight
(lbs.)
K21
†
1/16" (15 mm) 3" (76 mm) 5-1/4" (133 mm) .05
K23 3/16" (5 mm) 3" (76 mm) 5-1/4" (133 mm) .05
K28 3/16" (5 mm) 8" (203 mm) 10-1/4" (260 mm) .10
K34
‡
1/4" (6 mm) 4" (102 mm) 7-3/4" (197 mm) .10
K36
‡
1/4" (6 mm) 6" (152 mm) 9-3/4" (247 mm) .15
Cat.
No.
Tip
Size
Shank
Length
Overall
Length
Weight
(lbs.)
K38‡ 1/4" (6 mm) 8" (203 mm) 11-3/4" (298 mm) .20
K44 5/16" (8 mm) 4" (102 mm) 8-1/4" (209 mm) .25
K46 5/16" (8 mm) 6" (152 mm) 10-1/4" (260 mm) .25
K48 5/16" (8 mm) 8" (203 mm) 12-1/4" ( 311 mm) .30
Phillips-Tip Screw-Holding Screwdrivers
•
Positive gripping action holds and starts Phillips
screws in awkward, hard-to-reach places.
•
Blade separates to hold the fastener.
•
Not designed for torquing or tightening.
Cat. No. Overall Length Weight (lbs.)
K14 5" (127 mm) with pocket clip .05
K16 7" (178 mm) .05
K19 9" (229 mm) .05
K16
Slotted Plastic Handle
Screw-Holding Screwdrivers
•
Positive gripping action holds, starts, and drives
slotted screws in awkward, hard-to-reach places.
•
Split-blade screw-holding driver wedges into screw slot.
•
Not designed for torquing or tightening.
See page 296 for additional information on warnings.