Product Brochure

ManualsBrandsKlein Tools ManualsHand Tools5/16 in. Magnetic Tip Nut Driver with 6 in. Hollow Shaft- Cushion Grip Handle

Keystone Cabinet Phillips

(Profilated Tip)

Combo

Recess

Square TORX

Using Screwdrivers and Nut Drivers

Introduction

Klein screwdrivers give professionals extra-quality features that have made the Klein

name famous for hand tools – features that assure greater convenience, comfort and

efficiency in use, plus exceptional strength and durability.

All Klein drivers are made of the highest quality tempered steel, carefully

heat-treated for maximum strength. Shafts have integral flanges that provide an

extra-strong, torque-proof anchor in the handle. Strong, durable black tips are forged

and precision ground with square edges to fit screw openings securely. They resist

slippage and provide positive turning action.

Cushion-Grip screwdrivers feature super-comfortable, sure-grip handles on top-quality

blades for the professional. All Klein screwdrivers meet or exceed applicable ANSI and

MIL specifications.

The size of the screw or nut and the type of opening it has determines which

driver to use. Here are a few tips on how to use a driver that can be of benefit,

because screwdrivers are the most often misused and abused hand tools of all.

1. Never use a driver to do another tool's job.

Using a driver as a pry bar, scraper, or a chisel can ruin the tool, spoil

the work and cause injury.

2. Never push a driver beyond its capacity.

Make a pilot hole for the screw for easier driving. Use square-shank

drivers for heavy work.

3. Never expose a driver to excessive heat.

Direct flame can draw the temper from the metal, weakening and

possibly warping it, making it unsafe and inefficient to use.

Never use a driver at an angle to the screw.

Always keep the shank perpendicular to the screw head. Driving at an

angle or using a point that is too small can spoil the screw or slip and

damage the work.

Never depend on a driver's handle or covered blade to insulate

you from electricity.

Plastic and Cushion-Grip handles are intended only

to provide a firm, comfortable grip. Insulated blades are intended only as

a protective measure against shorting out components. Only use insulated

tools that are marked with the official international 1000-volt rating symbol if

there is any chance that the tool will make contact with an energized source.

6. Discard damaged or worn drivers.

TORX

is a registered trademark of Acument Intellectual Properties, LLC.

Cushion-Grip Screwdrivers

Integral flanges inside

handle provide solid,

twist-resistant blade anchor

Precision-machined

tip for exact fit

Meets or exceeds

applicable ASME / ANSI specifications

Tip-Ident

quickly

identifies the type of

screwdriver and

tip orientation

Cushion-Grip handle allows for

greater torque and comfort

Special heat-treated shank

Premium chrome-plated shank

for smooth feel and corrosion resistance

Screwdrivers, Nut Drivers and Accessories

See page 310 for additional information on warnings.