Use and Care Manual

FEATURES
CL900
CL800 CL700 CL600
CL450 CL390
CL320 CL220 CL120
Drop Protection 6.6 ft. (2 m) 6.6 ft. (2 m) 6.6 ft. (2 m) 6.6 ft. (2 m) 6.6 ft. (2 m) 6.6 ft. (2 m) 3.3 ft. (1 m) 3.3 ft. (1 m) 3.3 ft. (1 m)
Ingress Protection IP40 IP40 IP40 IP40 – – – – –
Safety
CAT IV 600V
CAT III 1000V
CAT IV 600V
CAT III 1000V
CAT IV 600V
CAT III 1000V
CAT IV 600V
CAT III 1000V
CAT IV 600V
CAT III 1000V
CAT III 600V CAT III 600V CAT III 600V CAT III 600V
AC Voltage (Volts) 1000V 1000V 1000V 1000V 1000V 600V 600V 600V 600V
DC Voltage (Volts) 1000V 1000V 1000V 1000V 1000V 600V 600V 600V 600V
AC + DC Voltage – – – – – – – –
AC Current (Amps) 2000A 600A 600A 600A 600A 400A 400A 400A 400A
DC Current (Amps) 2000A 600A – – – 400A – – –
Ohms (Resistance) 60MΩ 60MΩ 60MΩ 60MΩ 60MΩ 40MΩ 40MΩ 20MΩ 20MΩ
AC Millivolts – – – – – –
DC Millivolts
DC Microamps – – – – – –
True RMS –
Audible Continuity
Backlight
Reverse
Contrast Display
Temperature –
-14° – 1000°F
(-26° – 538°C)
-14° – 1000°F
(-26° – 538°C)
–
-40° – 1832°F
(-40° – 1000°C)
-40° – 1832°F
(-40° – 1000°C)
-40° – 1832°F
(-40° – 1000°C)
-40° – 1832°F
(-40° – 1000°C)
–
Differential
Temperature
– – – – – – – –
Digital Temperature
Calibration
– – – – – – – –
Low Impedance – – – – –
Low-Pass Filter – – – – – – – –
Inrush Current 2000A – – – 600A – – – –
Non-Contact
Voltage Testing
Auto Ranging
Range Hold
Data Hold
Diode Test – –
Capacitance Test 6000 µF 6000 µF 6000 µF – 6000 µF 4000 µF 4000 µF – –
Frequency /
Duty Cycle
1Hz – 500kHz 1Hz – 500kHz 1Hz – 500kHz – 10Hz – 1MHz 10Hz – 60kHz 10Hz – 60kHz – –
Max / Min MAX only MAX only
Relative Mode – – – – – – –
Magnet
Available As
Accessory
Available As
Accessory
Available As
Accessory
Available As
Accessory
Available As
Accessory
Available As
Accessory
Available As
Accessory
Available As
Accessory
Available As
Accessory
Worklight – – – – – – – –
Auto-Power Off
LCD Display Count 6000 6000 6000 6000 6000 4000 4000 2000 2000
DIGITAL
CLAMP METERS
Specifications subject to change. MKT022620 Rev 02/20 A