Product Brochure

Pry Bar
•
Used for prying, separating flanges and aligning holes
•
Forged from tough high-tensile carbon manganese steel
•
Thin, finely ground curved chisel end for ease of entry between surfaces
•
Forged, not turned, long tapered point for maximum strength
•
Hexagon profile for greater control
•
Precision heat treated to best suit product application
5PRBP45016
Cat. No. Chisel Width Hex Diameter Overall Length Weight
5PRBP45016 25/32" (19.8 mm) 5/8" 18" (457.2 mm) 1.7 lbs. (0.77 kg)
Fox Wedge-Stainless Steel
•
Used for splitting mating surfaces and for packing machinery and structures before fixing
•
Also used in the marine environment because of its corrosion-resistant properties
•
Forged from stainless steel for greater hardness and non-magnetic properties
•
Ground blade with fine edge for easy entry
•
Precision heat treated to best suit product application
7FWSS10025
Podger Pins (Broad Head Bull Pins)
•
Used for aligning holes and expanding holes in mild steel
•
Forged from tough high-tensile carbon manganese steel
•
Forged, not turned, long tapered point for ease of aligning
•
For added safety, forged head prevents pin being driven
right through hole and falling
•
Hex shaft allows spanner to be used to assist removal
•
Can be carried on belt
•
Precision heat treated to best suit product application
5POP25
Cat. No. Diameter Across
Hexagon Points
Hexagon Shaft
Diameter
Overall Length Weight
5POP25 1-3/32" (27.8 mm) 1" 16" (406.4 mm) 3.3 lbs. (1.50 kg)
5POP30 1-5/16" 1-3/16" 16" (406.4 mm) 4.5 lbs. (2.04 kg)
For more Barrel and Bull Pins
see Steel Construction section.
Cat. No. Width Thickness Material Overall Length Weight
5FW07538 1-1/2" (38.1 mm) 1/2" (12.7 mm) Steel 3" (76.2 mm) 0.35 lbs. (0.16 kg)
5FW10025 1" (25.4 mm) 5/16" (7.9 mm) Steel 4" (101.6 mm) 0.22 lbs. (0.10 kg)
5FW17550 2" (50.8 mm) 1/2" (12.7 mm) Steel 7" (177.8 mm) 1.01 lbs. (0.46 kg)
7FW27050 2" (50.8 mm) 1" (25.4 mm) Steel 11" (279.4 mm) 4.0 lbs. (1.81 kg)
7FWSS10025 1" (25.4 mm) 5/16" (7.9 mm) Stainless Steel 4" (101.6 mm) 3.5 oz. (99 g)
Barrel Drifts
•
Used for aligning holes in construction
•
Also used for expanding holes in mild steel
•
Forged from tough high-tensile steel
•
Taper is forged, not turned, for finer grain, giving
greater tensile strength
•
Will not score edge when driven hard
•
Precision heat treated to best suit product application
5BD24
Cat. No. Point Diameter Diameter Overall Length Weight
5BD19 23/64" (9.1 mm) 3/4" (19.1 mm) 6-9/32" (159.5 mm) 0.61 lbs. (0.28 kg)
5BD20 3/8" (9.5 mm) 25/32" (19.8 mm) 7-5/64" (179.8 mm) 0.77 lbs. (0.35 kg)
5BD30 0.578 " (14.7 mm) 1-3/16" (30.2 mm) 7-7/8" (200.0 mm) 1.8 lbs. (0.82 kg)
5BD33 0.156" (3.97 mm) 1-19/64" (32.9 mm) 7-7/8" (200.0 mm) 2.3 lbs. (1.04 kg)
Construction Tools
See page 310 for additional information on warnings.
www.kleintools.com
306
Mining & Heavy Industry Tools