SDS

Document number: Manganese（LF）_Dry_MAS_SDS_2021
Date: Jan. 1
st
, 2021
NA=Not Applicable Page 5 of 9
explosion.
● Never expose to open flames.
Exposing to flames could cause explosion of the battery.
● Never heat.
Heating the battery more than 100 degree centigrade could increase the internal pressure
leading to distortion, leakage, overheating, or explosion.
● Never disassemble or deform.
Disassembly or deforming of the battery could cause the leakage, overheating, or
explosion due to an internal short-circuits..
(b) Conditions for safe storage, including any incompatibilities.
Never let the battery contact with water. Never store the battery in hot and high humid
place.
.
8. Exposure controls/personal protection
(a) OSHA permissible exposure limit (PEL), American Conference of Governmental
Industrial Hygienists (ACGIH) Threshold Limit Value (TLV), and any other exposure limit
used or recommended by the chemical manufacturer, importer, or employer preparing the
safety data sheet, where available.
N/A
(b) Appropriate engineering controls.
Do not disassemble the product without professional basis.
(c) Individual protection measures, such as personal protective equipment.
No special equipment is required for handling, carrying or using the product.
The chemical materials concluded in the Product is sealed up, thus being stable, safe
and eco-friendly under common conditions.
9. Physical and chemical properties
(a) Appearance (physical state,
color, etc.)
:
The appearance is a cylindrical shape and it is a
primary cell with 1.5V nominal voltage
(b) Odor
:
not applicable
(c) Odor threshold
:
not applicable
(d) pH
:
not applicable
(e) Melting point/ freezing point
:
not applicable