Instructions / Assembly

ManualsBrandsKlein Tools ManualsAudio EquipmentBluetooth Speaker with Magnet and Hook

Klein Tools AEPJS3 is a powered speaker designed to provide high-quality

sound for smart phones, tablets, computers, or other audio devices. The

AEPJS3 will also charge common mobile devices like cell phones, tablets,

headphones, and other smaller USB devices.

CONTENTS

• AEPJS3 Bluetooth

Speaker

• 39.4" (1000mm) USB-A to USB-C Cable

• 23.6" (600mm) 1/8" (3.5 mm) Auxiliary Cable

• Instruction Sheet

GENERAL SPECIFICATIONS

• Dimensions:

5.46" x 5.37" x 2.33" (139 x 136 x 59 mm)

• Weight:

1.14 lb. (517 g)

• Wireless Compatibility:

Devices with Bluetooth

Version 4.2

• Wireless Connection Range:

100 ft. (30 m) in open space

• Support Pro les: AD2P, AVRCP, HFP, SPP

• Battery Type:

Internal, Li-Ion, 3.63V / 5200mAh

• Battery Life:

20+ hours at 70% volume

• Certi cations:

CE, FCC, IC, BC, NOM

• Operating/Charging Temperature:

32° to 104°F (0° to 40°C)

• Storage Temperature:

-22° to 140°F (-30° to 60°C)

• Relative Humidity:

<85% non-condensing

• Drop Protection:

6.6' (2 m)

• Ingress Protection (IP) Rating:

IP54

Specifications subject to change.

WARNINGS

Read, understand, and follow these instructions to ensure safe operation.

Failure to observe these warnings can result in risk of fire or electric

shock. Keep these instructions for future reference.

• No user-serviceable parts inside. Do not open enclosure or attempt to

repair this speaker.

• Never lubricate any part of this speaker.

• Do not expose to direct sunlight, open flame, heat sources, equipment

that produces heat, or extremes in environmental temperature.

• Never immerse in water or other liquids. Do not allow liquids, dust or

debris to enter openings or vents on the speaker enclosure.

• Water-resistant cover must be properly sealed to achieve specified

water & foreign object ingress protection. Keep seal free of dirt, oil,

sand, or other material that interferes with proper sealing. Failure to do

so can result in risk of fire or electric shock.

• Do not open water-resistant cover if wet or in a wet environment.

Dry the speaker thoroughly and the seal around water-resistant cover

completely before opening water-resistant cover.

• When speaker is in use or charging, make sure there is adequate space

to allow ventilation of internally generated heat.

• Use safety-rated power supply or wall adapter. Never use power supply

or wall adapter that exceeds the specified charging voltage and current.

• Route the power supply cable so that it will not to be stepped on or

pinched by other objects.

SYMBOLS ON PRODUCT

FEATURE DETAILS (FIG.A)

Power Button

Battery Status Indicator

Skip Backward Button

Daisy Chain LED Indicator

Play/Pause/Talk Button

Nail Hook

Skip Forward Button

Magnets (×2)

Daisy Chain Button

Auxiliary “Aux In” Jack

“-“ Volume Down Button

USB A Charge Out Port

“+” Volume Up Button

USB C Charge In/Out Port

Voice Control Button

Water/Dust-Resistant Cover

Bluetooth

LED Indicator

OPERATING INSTRUCTIONS

CHARGING BATTERY

NOTE: Fully charge before use. First-time charge should be at least 4 hours.

Connect the USB Type C cable connection to USB charging port

; plug the

other end of cable to computer or USB AC adapter or other USB power supply

(not included). Charge times will vary: 5V-2.4A Charger - Approx. 3 Hours,

5V-1.0A Charger: Approx. 5 Hours. The battery level indicator will illuminate to

indicate charging status (see table below).

CHARGING STATUS LED INDICATORS

Cascading

Not

Illuminated Solid Yellow Solid Green Solid Red Blinking

LED

Status % Charged

Cascading Green

Cascading Yellow

Cascading Red

0% to 24% charged

Cascading Green

Cascading Yellow

Solid Red

25% to 49% charged

Cascading Green

Solid Yellow

Solid Red

50% to 74% charged

Blinking Green

Solid Green

Solid Yellow

Solid Red

75% to 99% charged

Solid Green

Solid Yellow

Solid red

100% charged

MAINTENANCE

CLEANING:

Be sure speaker is turned off and wipe with a clean, dry

lint-free cloth.

Do not use abrasive cleaners or solvents.

STORAGE: If the speaker is to be left unused for an extended period of

time, charge before storing, and recharge periodically during storage, to

maintain battery's charging capacity.

DISPOSAL / RECYCLE

Do not place equipment and its accessories in the trash. Items must

be properly disposed of in accordance with local regulations. Please

see epa.gov/recycle for additional information.

ENGLISH

Warning or Caution Strong Magnetic Field

Risk of Electrical Shock Read Manual

Conforms with particular Code of Federal regulations

Meets CEC and DOE energy ef ciency requirements

Canada Energy Ef ciency Veri ed

This product has been independently tested by Intertek and

meets applicable published standards

NOM-NYCE – IFETEL

Do not place equipment and its accessories in the trash

Recycle

Conformité Européenne: Conforms with

European Economic Area directives

PLAYING AUDIO: Use your device to control the speaker or use the built-in control

buttons on the speaker.

• Press the Play/Pause/Talk button

to play or pause audio on your device.

• Press the “-”

or “+”

button to adjust the speaker volume. A tone will sound when

maximum volume is reached. Volume may also be controlled from your audio device.

• Press the Skip Forward

or Skip Backward

buttons to skip backward or

forward (respectively) during a song.

AUXILIARY AUDIO-IN: Connect one end of the auxiliary cable to the AUX jack

of the

speaker; plug the other end of cable to line-out or headphone jack of your device.

SPEAKERPHONE OPERATION:

• When an incoming call occurs, playing music is muted & ring tone sounds. Short-

press Play/Pause/Talk

button to answer the call, or long-press to ignore.

• To disconnect the call, short press the Play/Pause/Talk button

to hang up.

DAISY-CHAINING: Once you have your AEPJS3 Speaker connected to a Bluetooth

device,

you can connect a second AEPJS3 speaker to your already connected AEPJS3 speaker.

1. Ensure your primary AEPJS3 speaker is turned on.

2. Turn on your secondary AEPJS3 speaker.

3. Press the Daisy Chain button

on both AEPJS3 speakers. Press the Daisy Chain

button on both AEPJS3 speaker and the Daisy Chain LED

will blink.

4. Upon successful connection, a tone will sound on both speakers and the Daisy Chain

LED

will remain lit.

NOTE: If daisy-chain connection is not established 30 seconds

after pressing the daisy chain button, the speaker will exit the daisy-chain mode.

5. To disable daisy-chaining, press the daisy-chain button on either of the two speakers.

NOTE: The daisy chain connection between the two AEPJS3 speakers will NOT

automatically reconnect after the speakers are turned off. To reconnect, follow the

Daisy-chaining steps above.

VOICE CONTROL: Press the voice control button

to activate the voice assistant on your device.

NOTE: Before using this function, the devices must be connected to the speaker via Bluetooth

LOW BATTERY INDICATION: The Red LED on the Battery Status Indicator

will flash

on/off when battery level drops to approximately 5%. Speaker will automatically power off

when the battery level is below 2%. Recharge speaker as soon as possibleThis equipment

complies with IC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance 5mm between the

radiator and your body.

OPERATING INSTRUCTIONS

POSITIONING SPEAKER:

• Make sure that front of speaker is not obstructed.

• Stand speaker upright on a flat, level, stable surface.

• Attach speaker to a metal surface via the magnets

on the back of the

unit.

DO NOT mount to electrical equipment.

• Hang from a nail (or like item) by opening the Nail Hook

and

placing the Nail Hook over the head of the nail.

CHARGING DEVICES:

NOTE: For best results, use cable provided with your device.

1. Connect the cable to your device.

2. Connect the charging cable to the USB A Charge Out Port

or USB C

Charge In/Out Port

. Your device will automatically begin charging. The

device being charged should provide indication that charging has begun.

1. Press and hold the Power button

for 3 seconds to turn on the

speaker; your device will begin charging.

2. Press and hold the Power button

again for 3 seconds and all

functions will power off; your device will stop charging.

3. When AEPJS3 is in Charge-Out-Only mode, it will automatically

shut down once charging is complete and current is no longer

being drawn by the device.

Repeat these steps to charge another device.

COMPLIANCE

FCC & IC COMPLIANCE

This device complies with part 15 of the FCC RULES and Industry Canada

license-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received,including interference

that may cause undesired operation.

NOTE: The grantee is not responsible for any changes or modifications

not expressly approved by the party responsible for compliance. Such

modifications could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

FCC RF EXPOSURE STATEMENTS:

This transmitter must not be co‐located or operated in conjunction with

any other antenna or transmitter.

This equipment complies with FCC RF radiation exposure limits set forth

for an uncontrolled environment. This equipment should be installed and

operated with a minimum distance of 5mm between the radiator and your

body or nearby persons.

Under Industry Canada regulations, this radio transmitter may only

operate using an antenna of a type and maximum (or lesser) gain

approved for the transmitter by Industry Canada. To reduce potential

radio interference to other users, the antenna type and its gain should be

so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not

more than that necessary for successful communication.

IC NOTICE TO CANADIAN USERS

This device complies with industry Canada license-exempt RSS

standard(s). Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) This device

must accept any interference received, including interference that may

cause undesired operation of the device.

This device complies with RSS-247 of Industry Canada. Operation is subject

to the condition that this device does not cause harmful interference. This

Class B digital apparatus complies with Canadian ICES-003.

This equipment complies with IC radiation exposure limits set forth for

an uncontrolled environment. This equipment should be installed and

operated with minimum distance of 5 mm between the radiator and your

body. This transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter.

IC RADIATION EXPOSURE STATEMENT:

This equipment complies with IC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated

with minimum distance 5mm between the radiator and your body.

IFETEL REPORT

For use in Mexico, the operation of this equipment is subject to the following

two conditions: (1) This equipment or device does not cause harmful

interference and (2) this equipment or device accepts any interference,

including that which can cause undesired operation.

The Bluetooth

word mark and logos are registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by Klein Tools, Inc. is under license.

CUSTOMER SERVICE

KLEIN TOOLS, INC.

450 Bond Street, Lincolnshire, IL 60069 1-800-553-4676

customerservice@kleintools.com www.kleintools.com

AEPJS3

Bluetooth

Speaker with Magnet and Hook – Instructions

FIG. A

TOP

BOTTOM

1 49 2 5

610 7 8

113

BACK

SIDE

ON/OFF: Press & hold power button

for 3 seconds, a tone will sound. Unit

will automatically power off after 20 minutes of inactivity.

NOTE:

Turn unit off when not in use to prolong battery life.

PAIRING: Wireless connection activates automatically and is ready to pair when unit is

turned on. On your Bluetooth

wireless compatible device, enable Bluetooth

and search/

scan for devices that can be paired. Select “AEPJS3” when it appears (refer to the user

manual of your device). If necessary, enter “0000” as pairing passcode. A tone sounds

after a successful pairing.

NOTE: Unit automatically attempts to connect the last paired wireless device

but is ready to pair with any compatible device if the last paired device is not

detected within 5 seconds of powering on.

DISCONNECT PAIRING:

1) Turn unit off; -or

2) Double-press Power Button

. Bluetooth

LED Indicator

will blink; -or

3) Plug a cable into Aux jack

; -or

4) turn off Bluetooth

wireless connection in paired device.

RESET WIRELESS CONNECTION OR PAIRING WITH DIFFERENT DEVICES:

Double-press Power Button

(tone sounds). Repeat Pairing procedure with

different devices.

Summary of content (3 pages)

PAGE 1
AEPJS3 ENGLISH Klein Tools AEPJS3 is a powered speaker designed to provide high-quality sound for smart phones, tablets, computers, or other audio devices. The AEPJS3 will also charge common mobile devices like cell phones, tablets, headphones, and other smaller USB devices. CONTENTS • • • • AEPJS3 Bluetooth® Speaker 39.4" (1000mm) USB-A to USB-C Cable 23.6" (600mm) 1/8" (3.5 mm) Auxiliary Cable Instruction Sheet GENERAL SPECIFICATIONS • Dimensions: 5.46" x 5.37" x 2.
PAGE 2
AEPJS3 ESPAÑOL El AEPJS3 de Klein Tools es un altavoz eléctrico diseñado para proporcionar sonido de alta calidad a teléfonos inteligentes, tabletas, computadoras y otros dispositivos de audio. El AEPJS3 también carga dispositivos móviles comunes como teléfonos celulares, tabletas, auriculares y otros dispositivos USB pequeños. CONTENIDO • • • • Altavoz Bluetooth® AEPJS3 39.
PAGE 3
AEPJS3 FRANÇAIS L’article AEPJS3 de Klein Tools est un haut-parleur amplifié offrant un son de qualité supérieure et qui peut se connecter aux téléphones intelligents, aux tablettes, aux ordinateurs et à d’autres appareils audio. Il peut aussi servir à recharger la plupart des téléphones mobiles, tablettes, écouteurs et autres petits appareils USB.