User's Manual

ManualsBrandsKlein Tools ManualsAudio EquipmentBluetooth Speaker with Magnet and Hook

AEPJS3

Bluetooth

Speaker with Magnet and Hook – Instructions

SPANISH - Bluetooth

Speaker with Magnet and Hook – Instructions

FRENCH - Bluetooth

Speaker with Magnet and Hook – Instructions

ESPAÑOL

FRANÇAIS

ENGLISH

1390371 Rev 06/20 A

Klein Tools AEPJS3 is a powered speaker designed to provide high-quality

sound for smart phones, tablets, computers, or other audio devices. The

AEPJS3 will also charge common mobile devices like cell phones, tablets,

headphones, and other smaller USB devices.

CONTENTS

• AEPJS3 Bluetooth

Speaker

• 39.4" (1 m) USB Type C

• 23.6" (600 mm) 1/8" (3.5 mm) Auxiliary Cable

• Instruction Sheet

GENERAL SPECIFICATIONS

• Dimensions:

5.46" x 5.37" x 2.33" (138.6 x 136.4 x 59.2 mm)

• Weight:

1.14 oz. (520 g)

• Wireless Compatibility:

Devices with Bluetooth

Version 4.2

• Wireless Connection Range:

100 ft. (30 m) in open space

• Support Pro les: AD2P, AVRCP, HFP, SPP

• Output Power:

15W

•

Battery Type:

Internal, Li-Ion, 3.63V / 5200mAh

• Battery Life:

Approx. 20 hours at 70% volume

• Charging Requirements:

Maximum 5V DC, Minimum 1A

• Certi cations:

CE, FCC, IC, & BC, NOM

• Operating/Charging Temperature:

32° to 104°F (0° to 40°C)

• Storage Temperature:

-22° to 140°F (-30° to 60°C)

• Relative Humidity:

<85% non-condensing

• Drop Protection:

6.6' (2 m)

• Ingress Protection (IP) Rating:

IP54

Specifications subject to change.

WARNINGS

Read, understand, and follow these instructions to ensure safe operation.

Failure to observe these warnings can result in risk of fire or electric shock.

• Keep these instructions for future reference.

• No user-serviceable parts inside. Do not open enclosure or attempt to

repair this speaker.

• Never lubricate any part of this speaker.

• Never place this speaker on other electrical equipment.

• Do not expose to direct sunlight, open flame, heat sources, equipment that

produces heat, or extremes in environmental temperature.

• Never immerse in water or other liquids. Avoid spilling liquids or falling

foreign objects into openings or vents on the speaker enclosure.

• Water-resistant cover must be properly sealed to achieve specified water &

foreign object ingress protection. Keep seal free of dirt, oil, sand, or other

material that interferes with proper sealing. Failure to do so can result in

risk of fire or electric shock.

• Do not open water-resistant cover if wet or in a wet environment. Dry the

speaker thoroughly and the seal around water-resistant cover completely

before opening water-resistant cover.

• When speaker is in use or charging, make sure there is adequate space to

allow ventilation of internally generated heat.

• Use safety-rated power supply or wall adapter. Never use power supply or

wall adapter that exceeds the specified charging voltage and current.

• Route the power supply cable so that it will not to be stepped on or pinched

by other objects.

SYMBOLS ON PRODUCT

Warning or Caution

Strong Magnetic Field

Risk of Electrical Shock

Read Manual

Conforms with particular Code of Federal regulations

Meets CEC and DOE energy ef ciency requirements

Canada Energy Ef ciency Veri ed

This product has been independently tested by Intertek and meets

applicable published standards

NOM-NYCE – IFETEL

WEEE – Battery disposal

Conformité Européenne: Conforms with

European Economic Area directives

FEATURE DETAILS (FIG.A)

Power Button

Battery Status Indicator

Skip Backward Button

Daisy Chain LED Indicator

Play/Pause/Talk Button

Nail Hook

Skip Forward Button

Magnets (×2)

Daisy Chain Button

Auxiliary “Aux In” Jack

“-“ Volume Down Button

USB A Charge Out Port

“+” Volume Up Button

USB C Charge In/Out Port

Voice Control Button

Water/Dust-Resistant Cover

Bluetooth LED Indicator

MAINTENANCE

CLEANING:

Be sure speaker is turned off and wipe with a clean, dry lint-

free cloth.

Do not use abrasive cleaners or solvents.

STORAGE: If the speaker is to be left unused for an extended period of time,

charge before storing, and recharge periodically during storage, to maintain

battery's charging capacity.

OPERATING INSTRUCTIONS

CHARGING BATTERY

Fully charge speaker before use. First-time charge should be at least 4 hours.

Connect the USB Type C cable connection to USB charging port

; plug the

other end of cable to computer or USB AC adapter or other USB power supply

(not included). USB adapter/power supply should not exceed the specified

charging voltage and current (Max. 5V DC, min. 1A). Normal charging time is 3.25

to 4.25 hours. The battery level indicator will illuminate to indicate charging status

(see tables below).

CHARGING STATUS LED INDICATORS

Cascading

Not

Illuminated Solid Yellow Solid Green Solid Red Blinking

LED

Status % Charged

Not illuminated

Blinking red

0% to 24% charged

Not illuminated

Cascading Yellow

Cascading red

25% to 49% charged

Not illuminated

Cascading Green

Cascading Yellow

Cascading red

50% to 74% charged

Cascading Green

Cascading Yellow

Cascading red

75% to 99% charged

Solid Green

Solid Yellow

Solid red

100% charged

ON/OFF: Press & hold power button

for 3 seconds, a tone will sound. Unit

will automatically power off after 20 minutes of inactivity.

NOTE:

Turn unit off when not in use to prolong battery life.

PAIRING: Wireless connection activates automatically and is ready to pair when unit

is turned on. On your Bluetooth

wireless compatible device, enable Bluetooth

and

search/scan for devices that can be paired. Select “AEPJS3” when it appears (refer to

the user manual of your device). If necessary, enter “0000” as pairing passcode. A tone

sounds after a successful pairing.

NOTE: Unit automatically attempts to connect the last paired wireless device

device but is ready to pair with any compatible device if the last paired device

is not detected within 5 seconds of powering on.

DISCONNECT PAIRING:

1) Turn unit off; -or

2) Double-press Power Button

. Bluetooth LED Indicator

will blink; -or

3) Plug a cable into Aux jack

; -or

4) turn off Bluetooth

wireless connection in paired device.

RESET WIRELESS CONNECTION OR PAIRING WITH DIFFERENT DEVICES:

Double-press Power Button

(tone sounds). Repeat Pairing procedure with

different devices.

FIG. A

BACK / PARTE POSTERIOR / ARRIÈRE

TOP / SPANISH / FRENCH

BOTTOM / SPANISH / FRENCH

1615 14

1 49 2 5

610 7 8

113

Summary of content (2 pages)

PAGE 1
ENGLISH ESPAÑOL Klein Tools AEPJS3 is a powered speaker designed to provide high-quality sound for smart phones, tablets, computers, or other audio devices. The AEPJS3 will also charge common mobile devices like cell phones, tablets, headphones, and other smaller USB devices. CONTENTS • • • • AEPJS3 Bluetooth® Speaker 39.4" (1 m) USB Type C 23.6" (600 mm) 1/8" (3.
PAGE 2
ENGLISH ESPAÑOL OPERATING INSTRUCTIONS PLAYING AUDIO: Use your device to control the speaker or use the built-in control buttons on the speaker. • Press the Play/Pause/Talk button 3 to play or pause audio on your device. • Press the “-” 6 or “+” 7 button to adjust the speaker volume. A tone will sound when maximum volume is reached. Volume may also be controlled from your audio device. • Press the Skip Forward 4 or Skip Backward 2 buttons to skip backward or forward (respectively) during a song.