ENGLISH INSTRUCTION MANUAL Utility Bucket Light BAT20UBL BAT20UBL1 • 20V Lithium Ion • 2500 Lumens • IP56 ESPAÑOL pg. 11 FRANÇAIS p.
ENGLISH GENERAL SPECIFICATIONS FEATURE DETAILS Klein Tools BAT20 UBL is designed for professional worksite illumination. The clamp function allows this tool to be used on most utility buckets. This provides optimal lighting while working. • Spot: 900 Lumens - 8.5 hours (approximate using 20V 4Ah battery) • Flood: 1600 Lumens - 5 hours (approximate using 20V 4Ah battery) • Spot + Flood: 2500 Lumens - 3.
ENGLISH DEFINITIONS The definitions below describe the level of severity for each signal word: DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
ENGLISH 4 SAFETY SAFETY WARNING: FIRE HAZARD. Do not store or carry the battery pack so that metal objects can contact exposed battery terminals. For example, do not place the battery pack in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc. Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like.
ENGLISH SAFETY Ampere Rating (Amps) More Not More Than Than 0 6 6 10 10 12 12 16 Minimum Gauge for Cord Sets Volts Total Length of Cord 120 V 25' (7.6 m) 50' (15.2 m) 100' (30.5 m) 150' (45.7 m) 240 V 50' (15.2) 100' (30.5) 200' (61.0) 300' (91.4) AWG 18 18 16 14 16 16 16 12 16 14 14 12 14 12 Not Recommended • DO NOT place any object on top of the charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat.
ENGLISH BATTERY CHARGING INSTRUCTIONS BATTERY CHARGER • This Class B digital apparatus complies with Canadian ICES-003. • This device complies with Part 15 of the FCC Rules and Industry Canada Licenseexempt RSS standard(s). Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.
ENGLISH BATTERY CHARGING INSTRUCTIONS WALL MOUNTING Models DCB107, DCB112, DCB113, DCB115 These chargers are designed to be wall mountable or to sit upright on a table or work surface. If wall mounting, locate the charger within reach of an electrical outlet. Mount the charger securely using drywall screws at least 1" (25.4 mm) long, screwed into wood to an optimal depth leaving approximately 7/32" (5.5 mm) of the screw exposed. IMPORTANT CHARGING NOTES 1.
ENGLISH OPERATING INSTRUCTIONS FUEL GAUGE BATTERY PACKS Some DeWALT battery packs include a fuel gauge which consists of three green LED lights that indicate the level of charge remaining in the battery pack. To actuate the fuel gauge, press and hold the fuel gauge button G . A combination of the three green LED lights will illuminate designating the level of charge left.
ENGLISH MAINTENANCE • Have your bucket light serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Contact Klein Tools for authorized service centers. Visit www.kleintools.com for service manual and replacement part list. • The charger and battery pack are NOT serviceable.
ENGLISH WARRANTY – BUCKET LIGHT Klein Tools Battery Operated Tools, manufactured and sold for commercial or industrial uses, are warranted to be free from defects in materials and workmanship. Klein Tools, Inc. warrants that the products set forth below, which are manufactured and sold for commercial or industrial uses, are warranted to be free from defects in materials and workmanship for the periods of time set forth below (unless otherwise noted on the product packaging).
