Use and Care Manual

ManualsBrandsKlein Tools ManualsClamp LightsCordless Utility Bucket LED Light Kit

ENGLISH

MAINTENANCE

• Have your bucket light serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

Contact Klein Tools for authorized service centers. Visit www.kleintools.com for

service manual and replacement part list.

• The charger and battery pack are NOT serviceable. To assure product safety and

reliability, repairs, maintenance and adjustments should be performed by a DeWALT

factory service center, a DeWALT authorized service center or other qualified

service personnel. Always use identical replacement parts.

CLEANING

BUCKET LIGHT: Blow dirt and dust out of all air vents with clean, dry air at least once

a week. To minimize the risk of eye injury, always wear ANSI Z87.1 approved eye

protection when cleaning.

Never use solvents or other harsh chemicals for cleaning the non-metallic parts of

the tool. These chemicals may weaken the plastic materials used in these parts. Use a

cloth dampened only with water and mild soap. Never let any liquid get inside the tool;

never immerse any part of the tool into a liquid.

CHARGER:

WARNING: SHOCK HAZARD. Disconnect the charger from the AC outlet

before cleaning. Dirt and grease may be removed from the exterior of the charger

using a cloth or soft non-metallic brush. Do not use water or any cleaning solutions.

STORAGE

1. The best storage place is one that is cool and dry, away from direct sunlight and

excess heat or cold.

2. For long storage, it is recommended to store a fully charged battery pack in a cool

dry place out of the charger for optimal results.

NOTE:

Battery packs should not be stored completely depleted of charge. The battery

pack will need to be recharged before use.

THE RBRC™ SEAL

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel

cadmium, nickel metal hydride or lithium ion batteries (or battery packs) indicate

that the costs to recycle these batteries (or battery packs) at the end of their useful

life have already been paid. In some areas, it is illegal to place spent nickel cadmium,

nickel metal hydride or lithium ion batteries in the trash or municipal solid waste

stream and the RBRC program provides an environmentally conscious alternative.

RBRC™ has established programs in the United States and Canada to facilitate

the collection of spent nickel cadmium, nickel metal hydride

or lithium ion batteries. Help protect our environment and

conserve natural resources by returning the spent nickel

cadmium, nickel metal hydride or lithium ion batteries to an

authorized DeWALT service center or to your local retailer for

recycling. You may also contact your local recycling center for

information on where to drop off the spent battery RBRC™ is

a registered trademark of the Rechargeable Battery Recycling Corporation.

WARNING: EXPLOSION HAZARD.

DO NOT INCINERATE BATTERY PACK.

DISPOSAL

Do not place equipment and its accessories in the trash. Items must be

properly disposed of in accordance with local regulations. Please see