Buying Guide
Table Of Contents
- Introduction
- Magnetizer/Demagnetizer
- Cushion-Grip Screwdrivers
- Multi-Bit Cushion-Grip Screwdrivers/Nut Drivers
- Magnetic Screwdriver Bit Sets
- Replacement Parts
- Plastic-Handle Screwdrivers
- Pocket-Clip
- Magnetic
- Slotted Screw-Holding
- Phillips Screw-Holding
- Impact and Torque Drivers
- Cushion-Grip Nut Drivers
- Plastic-Handle Nut Drivers
- Tapping Tools
- Scratch Awls
- Conduit Reamers
- Power Driver Bits
- Power Nut Drivers
- Magnetic Hex Drivers
- Drill/Tap/Deburr Set
A116-3
Cat. No. Tip Type Shank Type Shank Length Overall Length Weight
A130-2 1/8" (3.2 mm) Keystone Round 2" (50.8 mm) 3-7/8" (98.4 mm) 0.80 oz (22.7 g)
A130-3 1/8" (3.2 mm) Keystone Round 3" (76.2 mm) 4-7/8" (123.8 mm) 0.64 oz (18.1 g)
A116-2 3/32" (2.4 mm) Keystone Round 2" (50.8 mm) 4-7/16" (112.7 mm) 0.80 oz (22.7 g)
A116-3 3/32" (2.4 mm) Keystone Round 3" (76.2 mm) 5-7/16" (138.1 mm) 0.48 oz (13.6 g)
A131-2 1/8" (3.2 mm) Keystone Round 2" (50.8 mm) 4-7/16" (112.7 mm) 0.80 oz (22.7 g)
P12 #0 Phillips Round 2-1/2" (63.5 mm) 5" (127.0 mm) 0.80 oz (22.7 g)
Magnetic Plastic-Handle Screwdriver
•
Powerful magnet built into its shank to hold interchangeable bits
and also screws
•
Comfortable handle for easier driving
•
Interchangeable bits store inside handle for quick access
•
Wide selection of bits for different screw types
70035
Cat. No. Phillips Bits Slotted Bits Shank Length Handle Color Overall Length Weight
70035 #1, #2 3/16" (4.8 mm), 9/32" (7.1 mm) 3-3/4" (95.3 mm) Black and Clear 3-7/16" 0.25 lb (0.11 kg)
Slotted Plastic-Handle Screw-Holding Screwdrivers
•
Positive gripping action holds, starts, and drives slotted
screws in awkward, hard-to-reach places
•
Split-blade screw-holding driver wedges into screw slot
•
Not designed for torquing or tightening
K36
Cat. No. Overall Length Shank Type Tip Type Weight
K23 5-1/4" (133.4 mm) Round 3/16" (4.8 mm) Slotted 0.80 oz (22.7 g)
K28 10-1/4" (260.4 mm) Round 3/16" (4.8 mm) Slotted 0.10 lb (0.05 kg)
K34 7-3/4" (196.9 mm) Round 1/4" (6.4 mm) Slotted 0.10 lb (0.05 kg)
K36 9-3/4" (247.7 mm) Round 1/4" (6.4 mm) Slotted 0.15 lb (0.07 kg)
K38 11-3/4" (298.5 mm) Round 1/4" (6.4 mm) Slotted 0.20 lb (0.09 kg)
K44 8-1/4" (209.6 mm) Round 5/16" (7.9 mm) Slotted 0.25 lb (0.11 kg)
K46 10-1/4" (260.4 mm) Round 5/16" (7.9 mm) Slotted 0.25 lb (0.11 kg)
K48 12-1/4" (311.2 mm) Round 5/16" (7.9 mm) Slotted 0.30 lb (0.14 kg)
Precision blade for use with small precision screws. Blade thickness of 0.028" expanding to 0.045".
‡ Blade thickness of 0.043" expanding to 0.085". K21 and K23 have pocket clips.
Cat. No. Set Contains Weight
SK234 Slotted Holding Screwdriver Set 3 Pc 0.40 lb
(0.18 kg)
Cat. No. Description
K23 3/16" Screw Holding Screwdriver 3"
K34 Slotted Screw Holding Screwdriver 4"
K46 Slotted Holding Screwdriver 10-1/4" L
Pocket-Clip Screwdrivers
Includes core Plastic-Handle Screwdriver features plus:
•
Specially designed for delicate instrument work
Plastic-Handle Screwdrivers
Screwdrivers, Nut Drivers and Accessories
See page 310 for additional information on warnings.
62
www.kleintools.com