Product Brochure

Insulated High-Leverage Side-Cutting Pliers -
Connector Crimping
Additional Features:
•
Crimping die behind hinge for superior leverage crimping non-insulated
connectors, lugs and terminals
•
High-leverage design provides 46% greater cutting and gripping power than
other plier designs
•
Streamlined design with sure-gripping, cross-hatched knurled jaws
D213-9NECR-INS
Cat. No. Nose Type Overall Length Jaw Length Jaw Width Jaw Thickness Knife Length Weight
D213-9NE-CR-INS New England 9-5/8" (244.5 mm) 1-19/32" (40.5 mm) 1-5/16" (33.3 mm) 5/8" (15.9 mm) 25/32" (19.8 mm) 1.3 lbs. (0.59 kg)
Insulated High-Leverage Side-Cutting Pliers
Additional Features:
•
High-leverage design provides 46% greater cutting and gripping power than
other plier designs
•
Streamlined design with sure-gripping, cross-hatched knurled jaws
D213-9NE-INS
Cat. No. Nose Type Overall Length Jaw Length Jaw Width Jaw Thickness Knife Length Weight
D213-9NE-INS New England 9-5/8" (244.5 mm) 1-19/32" (40.5 mm) 1-5/16" (33.3 mm) 5/8" (15.9 mm) 25/32" (19.8 mm) 1.3 lbs. (0.59 kg)
2000 Series* – Heavy-duty cutting knives
D2000-9NE-INS New England 9-5/8" (244.5 mm) 1-19/32" (40.5 mm) 1-5/16" (33.3 mm) 5/8" (15.9 mm) 25/32" (19.8 mm) 25/32" (19.8 mm)
*Cuts ACSR, screws, nails, and most hardened wire. Features combination polished and black-oxide finish.
FORGED STEEL
from Klein's US-made, proprietary blend
Classic Insulated Tools
WARNING: Do NOT touch uninsulated portion of the tool or any
conductive object when either might contact an energized source.
WARNING: Because moisture, films, or other surface contaminants are conductive,
Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
WARNING: Whenever possible, always de-energize lines and equipment prior to
working on or around them. Klein insulated tools are designed only to reduce the chance
of injury where the tool may make contact with an energized source.
Thick, exceptionally tough, high-dielectric
white inner coating is bonded to the tool
Induction hardened cutting knives for long life
Forged steel handle
A flame retardant, impact-resistant,
bright orange outer coating
Integral guards help prevent hand
contact with conductive parts
All Classic Klein insulated tools comply with ASTM F-1505 and IEC 60900-2004 standards for insulated tools and are clearly marked with the
official international 1000-volt rating symbol. Not all tools with plastic coatings or plastic handles provide protection against electrical shock.
The large, bright orange handles make the tool comfortable to use all day and easy to identify in the field. Only use those tools that are marked
with the official international 1000-volt rating symbol, as shown, if there is any chance that the tool will make contact with an energized
source. Product numbers with the INS suffix contain
these warnings and must be understood.
Hot-riveted joint
ensures smooth action
and no handle wobble
WARNING: Wear approved eye protection. Always inspect your tools before use.
Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white
layer shows through orange layer.
WARNING: Only use tools that are marked with the official international 1000-volt
rating symbol shown below, if there is any chance
that the tools will make contact with an energized source.
Cuts ACSR, screws, nails, and most hardened wire
pliers available.
W
E
A
R
Y
E
Y
P
R
O
T
E
C
T
I
O
N
D
2
1
3
-
9
N
E
N
N
S
Insulated Tools
www.kleintools.com
49
See page 310 for additional information on warnings.