Product Brochure

Insulated Screwdrivers - Round-Shank
Additional Features:
•
Profilated Phillips-tip provides a more consistent geometric
symmetry than conventional Phillips-tip screwdrivers
•
Square-Recess tips are perfect for electrical, telephone and work in
recessed holes and other tight spaces
603-7-INS
Cat. No. Tip Type Tip Size Shank Length Overall Length Weight
6334INS Phillips #1 4" (101.6 mm) 7-3/4" (196.9 mm) 2.1 oz. (60 g)
603-4-INS Phillips #2 4" (101.6 mm) 8-5/16" (211.1 mm) 3.2 lbs. (1.45 kg)
6037INS Phillips #2 7" (177.8 mm) 11-5/16" (287.3 mm) 4.0 lbs. (1.81 kg)
6337INS Phillips #1 7" (177.8 mm) 12-3/8" (314.3 mm) 6.4 lbs. (2.90 kg)
607-3-INS Cabinet Tip 3/32" (2.4 mm) 3" (76.2 mm) 6-3/4" (171.5 mm) 1.9 lbs. (0.86 kg)
612-4-INS Cabinet Tip 1/8" (3.2 mm) 4" (101.6 mm) 7-3/4" (196.9 mm) 2.1 oz. (60 g)
601-4-INS Cabinet Tip 3/16" (4.8 mm) 4" (101.6 mm) 7-3/4" (196.9 mm) 2.1 oz. (60 g)
601-7-INS Cabinet Tip 3/16" (4.8 mm) 7" (177.8 mm) 10-3/4" (273.1 mm) 2.7 lbs. (1.22 kg)
602-4-INS Cabinet Tip 1/4" (6.4 mm) 4" (101.6 mm) 8-5/16" (211.1 mm) 3.2 lbs. (1.45 kg)
605-7-INS Cabinet Tip 1/4" (6.4 mm) 7" (177.8 mm) 11-5/16" (287.3 mm) 4.0 lbs. (1.81 kg)
602-7-INS Cabinet Tip 5/16" (7.9 mm) 7" (177.8 mm) 12-3/8" (314.3 mm) 6.4 lbs. (2.90 kg)
602-8-INS Cabinet Tip 3/8" (9.5 mm) 8" (203.2 mm) 13-3/8" (339.7 mm) 8.0 oz. (227 g)
661-4-INS Square #1 4" (101.6 mm) 8-5/16" (211.1 mm) 3.2 lbs. (1.45 kg)
661-7-INS Square #1 7" (177.8 mm) 11-5/16" (287.3 mm) 3.2 lbs. (1.45 kg)
662-4-INS Square #2 4" (101.6 mm) 8-5/16" (211.1 mm) 3.2 lbs. (1.45 kg)
662-7-INS Square #2 7" (177.8 mm) 11-5/16" (287.3 mm) 3.2 lbs. (1.45 kg)
661-7-INS
FORGED STEEL
from Klein's US-made,
proprietary blend
Insulated Screwdrivers
WARNING: Do NOT touch uninsulated portion of the tool or any
conductive object when either might contact an energized source.
WARNING: Wear approved eye protection. Always inspect your tools before use.
Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white
layer shows through orange layer.
WARNING: Because moisture, films, or other surface contaminants are conductive,
Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
WARNING: Only use tools that are marked with the official international 1000-volt
rating symbol shown below, if there is any chance
that the tools will make contact with an energized source.
WARNING: Whenever possible, always de-energize lines and equipment prior to
working on or around them. Klein insulated tools are designed only to reduce the chance
of injury where the tool may make contact with an energized source.
Durable, two layer,
molded insulation
Bright orange outer coating
is flame and impact resistant
Klein insulated tools meet or exceed the
IEC 60900 and ASTM F1505 standards,
for insulated tools, and are clearly marked
with the official 1000-volt rating symbol
Tip-Ident
®
quickly
identifies driver size
Cushion-Grip handles
for greater torque and comfort
Thick, exceptionally tough,
high-dielectric white inner
coating is bonded to the tool
Product numbers with the INS suffix contain these warnings
and must be understood.
Insulated Tools
www.kleintools.com
52
See page 310 for additional information on warnings.