Klein Pliers Klein specializes in the making of the world's finest pliers... pliers that professionals have trusted for more than 160 years. Klein pliers feel right and work right. They are job-matched for every kind of work you do; designed and built with exceptional quality standards in a tradition that dates back to 1857.
Pliers Introduction – Pliers Klein Quality Klein pliers are made of the finest U.S. steel alloy. Forged, precision machined, hardened, and carefully tempered for maximum strength, Klein pliers provide exceptional performance and durability. Side-cutting and long-nose pliers with side cutters have knives that meet at the hinge first and then meet at least one-half of the knife length. Diagonal-cutting pliers meet at the tip first and then meet at least one-half of the knife length.
Pliers Introduction – Pliers Pliers Dimensions A – Overall Length D – Jaw Thickness All Klein pliers are listed with necessary dimensions in both inches and millimeters. The following drawings of six basic types of pliers are keyed by letter to the dimensions given for each pliers listed. All dimensions are subject to commercial tolerances. B – Jaw Length E – Knife Length C – Jaw Width F – Point Thickness 1. Side-Cutting Pliers 1. Side- Cutting Pliers 5. D D C C 4. Long-N ose Pliers 3.
Pliers Side-Cutting Pliers Plastic-dipped handles for comfort and ease of identification Precision-hardened plier head for on-the-job toughness Unique handle tempering helps absorb the "snap" when cutting wire " Handform" handles for full gripping and cutting power Hot-riveted joint ensures smooth action and no handle wobble Induction hardened cutting knives for long life FORGED STEEL Sure-gripping cross-hatched knurled jaws from Klein's US-made, proprietary blend High-Leverage Side-Cutting Pliers
Pliers Side-Cutting Pliers High-Leverage Side-Cutting Pliers Fish Tape Pulling Includes core side-cutting features plus: Easily pulls 1/8" or 1/4" flat steel fish tape without damaging the tape High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and gripping power than other pliers designs Cat. No. J2000-9NECRTP crimps non-insulated connectors, lugs, and terminals • • • D213-9NETP Plastic-Dipped JOURNEYMAN™ Dual-Material Cat. No.
Pliers Side-Cutting Pliers Side-Cutting Pliers Includes core side-cutting features plus: J20017NE features Journeyman™ Series dual-material handles • D201-9NE Cat. No. D201-8 D201-7NE D201-8NE D201-9NE J20017NE Overall Length 8-11/16" (220.7 mm) 7-7/16" (188.9 mm) 8-11/16" (220.7 mm) 9-3/8" (238.1 mm) 7-9/16" (192.1 mm) Jaw Length 1-7/16" (36.5 mm) 1-9/32" (32.5 mm) 1-7/16" (36.5 mm) 1-19/32" (40.5 mm) 1-9/32" (32.5 mm) Jaw Width 1-7/32" (31.0 mm) 1-1/16" (27.0 mm) 1-3/16" (30.2 mm) 1-5/16" (33.
Pliers Diagonal-Cutting Pliers Plastic-dipped handles for comfort and ease of identification Hot-riveted joint ensures smooth action and no handle wobble Induction-hardened cutting knives for long life Short jaws and beveled cutting edges permit close cutting of wire FORGED STEEL from Klein's US-made, proprietary blend High-Leverage Diagonal-Cutting Pliers Includes core diagonal-cutting features plus: High-leverage design.
Pliers Diagonal-Cutting Pliers High-Leverage Diagonal-Cutting Pliers Angled Head Includes core diagonal-cutting features plus: Angled head design for easy work in confined spaces High-leverage design. Rivet is closer to the cutting edge for 36% greater cutting and gripping power than other plier designs Cat. No.
Pliers Diagonal-Cutting Pliers Heavy-Duty Diagonal-Cutting Pliers - Tapered Nose Includes core diagonal-cutting features plus: Heavier design for all-purpose use Tapered nose for easy working in confined areas D220-7 • • Cat. No. D220-7 D252-6 Overall Length 7-11/16" (195.3 mm) 6-1/8" (155.6 mm) Jaw Length 1" (25.4 mm) 13/16" (20.6 mm) Jaw Width 31/32" (24.6 mm) 3/4" (19.1 mm) Jaw Thickness 1" (25.4 mm) 13/16" (20.
Pliers Diagonal-Cutting Electronics Pliers Midget Diagonal-Cutting Pliers - Nickel Ribbon Wire Cutters Includes core diagonal-cutting features plus: Designed to cut nickel ribbon wire Nose tip is only 1/32" (0.8 mm) for precise work in confined areas Cutting knife tip is 3/16" (5 mm) long for precise cutting Spring-loaded action for self-opening • • • • D230-4C Cat. No. D230-4C Overall Length 4-1/4" (108.0 mm) Jaw Length 1/2" (12.7 mm) Jaw Width 7/16" (11.1 mm) Jaw Thickness 1/2" (12.
Pliers Long-Nose Pliers Hot-riveted joint ensures smooth action and no handle wobble Plastic-dipped handles for comfort and ease of identification Slim head design for working in confined areas. FORGED STEEL from Klein's US-made, proprietary blend All-Purpose Pliers • Cat. No. J206-8C strips 8-16 AWG solid and 10-18 AWG stranded wire No. J207-8CR strips 10-18 AWG solid and 12-20 AWG stranded • Cat.
Pliers Long-Nose Pliers Standard Long-Nose Pliers - Side-Cutting Includes core long-nose features plus: Induction-hardened, long-lasting cutting knives Knurled jaws for sure wrapping and looping Curved handles provide greater tool control Spring-loaded action for self-opening (Cat. Nos. D203-6C, D203-7C) • • • • D203-6C D203-6H2 19 & 22 AWG WIRE STRIPPING Plastic-Dipped JOURNEYMAN™ Handle Finish Plastic-Dipped Plastic-Dipped Plastic-Dipped Plastic-Dipped Journeyman Journeyman Plastic-Dipped Weight 0.
Pliers Electronics Long-Nose Pliers Midget Long-Nose Pliers - Slim-Nose Includes core long-nose features plus: Lightweight, slim-nose pliers for precision subminiature assembly work Knurled jaws for sure wrapping and looping Curved handles provide greater tool control Spring-loaded for self-opening action • • • • D322-4 1/2C Cat. No. D321-41/2C D322-41/2C Overall Length 4-13/16" (122.2 mm) 4-13/16" (122.2 mm) Jaw Length Jaw Width 1-1/16" (27.0 mm) 7/16" (11.1 mm) 1-1/16" (27.0 mm) 7/16" (11.
Pliers Telecom Long-Nose Pliers Long-Nose Pliers - Connector Crimping Includes core long-nose features plus: Crimps UR/UY/UG insulation displacement connectors (IDC) - Scotchlok® type connectors Grooved jaws for wire wrapping, looping and twisting Cleanly strips 23 to 24 AWG wire Hot-riveted joint ensures smooth action and no handle wobble Induction-hardened cutting surface for long life • • • • • VDV026-049 UR IDC UG IDC VDV826-605 Cat. No. VDV026-049 Overall Length 6-51/64" (172.
Pliers Telecom Long-Nose Pliers Long-Nose Telephone Work Pliers-Type L1 Includes core long-nose features plus: Knurled jaw tips for greater gripping power Induction-hardened side-cutting knives for long life Convenient 0.030" stripping hole Curved handles provide greater tool control • • • • Cat. No. 71980 Overall Length Jaw Length 6-5/8" (168.3 mm) 1-7/8" (47.6 mm) 71980 Jaw Width 11/16" (17.5 mm) Jaw Thickness 3/8" (9.5 mm) Point Diameter 1/16" x 3/32" (1.6 mm x 2.4 mm) Knife Length 1/2" (12.
Pliers Pump Pliers Klaw™ Pump Pliers narrow design for easy work in small or hard-to• Compact, reach spaces surfaces with specially hardened teeth for reduced • Gripping wear and positive gripping • Extended grips for added comfort Pump Pliers: Push button and quick ratchet • Quick-Adjust feature allows for fast and easy adjustment to any position. D504-10 (Cat. Nos. D504-10B, D504-12B) Cat. No. Overall Length Jaw Capacity Handle Color Handle Finish Weight 2-1/8" (54.0 mm) 2-3/4" (69.
Pliers Slip-Joint Pliers Slip-Joint Pliers • Shear-type cutter for precision wire cutting • Two versatile jaw positions • Serrated jaws provide sure-gripping power • Nickel-chrome plated for long life Cat. No. D511-6 D511-8 D511-10 Overall Length 6-9/16" (166.7 mm) 8-1/16" (204.8 mm) 9-7/8" (250.8 mm) D511-6 Jaw Length 1-3/16" (30.2 mm) 1-3/8" (34.9 mm) 1-3/4" (44.5 mm) Jaw Width 1-3/16" (30.2 mm) 1-1/4" (31.8 mm) 1-3/8" (34.9 mm) Jaw Thickness 3/8" (9.5 mm) 7/16" (11.1 mm) 15/32" (11.
