Product Brochure

Cat. No. UPC# 0-92644+ Batteries Height Width Depth Weight (oz.)
ET60 69036-5 Not required 5.67" (144 mm) 2.35" (59.7 mm) 1.44" (36.6 mm) 3.2 (92 g)
ET250 69037-2 3 x AAA 6.06" (153.8 mm) 2.33" (59.2 mm) 1.64" (41.6 mm) 6.0 (170 g)
ET60
FEATURES
ET250
9.8 ft. (3m) Drop Protection 9.8 ft. (3m)
IP54
Ingress Protection IP53
CAT IV
600V
Safety
CAT IV
600V
600V AC Voltage (Volts) 600V
600V DC Voltage (Volts) 600V
–
Audible Continuity
–
Backlight
Low Impedance
–
GFCI-Protected Circuit Testing
–
Flashlight
–
Auto-Power Off
Not Required Battery 3 x AAA
–
LCD Display with Backlight
ET60 is a solid-state, low
impedance, electronic voltage
tester. It measures AC/DC
voltages up to 600V. The ET60
does NOT require batteries;
it is powered by the applied
voltage. It is an excellent
choice for testing voltage in
electrical circuits, at outlets, in
light fixtures or anywhere else
where AC/DC voltage testing is
required.
• Modern solid-state design
• Does NOT use a battery
• Low impedance
• Integrated test-lead
holders (on back)
• Tough Meter design is water
and dust resistant and
withstands 9.8 ft. (3m) drops
ET250 is a solid-state, digital
voltage and continuity tester. It
measures AC/DC voltages up to
600V and tests for continuity.
Additionally, the ET250 tests GFCI
protected circuits to verify that
the GFCI device is functioning
appropriately. The tester includes
a backlight and integrated
flashlight for working in reduced
ambient lighting conditions.
• Automatically selects
measurement mode
• Auto-powers on when
a voltage/continuity
measurement is attempted
• Modern solid-state design
• Tests GFCI protected circuits
• Built-in test lead holders
• Backlit LCD display
• Integrated flashlight
• Tough Meter design is water
and dust resistant and
withstands 9.8 ft. (3m) drops
TOUGH METER VOLTAGE TESTERS
TOUGH METER VOLTAGE TESTERS
LCD Display
with Backlight
ET60
Electronic AC/DC
Voltage Tester
ET250
Digital AC/DC Voltage
and Continuity Tester
GFCI Test
Button
Power On/Off
Worklight
Backlight
Test-lead
input jacks
Voltage
Indicator
LEDs
DC Polarity
Indicators
(indicates AC
when both are
illuminated)
Tests GFCI protected circuits
Test-leads seated in the lead holders on
the back of the tester are spaced correctly
to test tamper-resistant US-style outlets.
Voltage indicator lights up to voltage
amount. DC Polarity Indicators (indicates
AC when both are illuminated).
Flashlight and backlit display when
working in zero to low light situations.
LCD screen provides more accurate
voltage measurement.
BOTH MODELS
WORK WITH MOST
STANDARD REPLACEABLE
TEST-LEADS*
Integrated
Flashlight
*Set of Klein test-leads included in package