Buying Guide
Table Of Contents
- Introduction
- Magnetizer/Demagnetizer
- Cushion-Grip Screwdrivers
- Multi-Bit Cushion-Grip Screwdrivers/Nut Drivers
- Magnetic Screwdriver Bit Sets
- Replacement Parts
- Plastic-Handle Screwdrivers
- Pocket-Clip
- Magnetic
- Slotted Screw-Holding
- Phillips Screw-Holding
- Impact and Torque Drivers
- Cushion-Grip Nut Drivers
- Plastic-Handle Nut Drivers
- Tapping Tools
- Scratch Awls
- Conduit Reamers
- Power Driver Bits
- Power Nut Drivers
- Magnetic Hex Drivers
- Drill/Tap/Deburr Set
Additional and replacement bits can be found on page 74
Extended-Reach Multi-Bit Screwdrivers/Nut Drivers
•
Interchangeable shaft holds four universal tips and converts to two nut driver sizes
•
Extended shafts and blades provide 39% longer reach
•
Small diameter shaft for comfortable grip and quick, easy turning
32559
Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Square Bits Shank Length Handle Color Overall Length Weight
32559 1/4", 5/16" #1, #2 1/4" (6.4 mm),
3/16" (4.8 mm)
— 4-7/64"
(104.4 mm)
Yellow/Black 9-7/64"
(231.4 mm)
0.41 lb
(0.19 kg)
32560 1/4", 5/16" #2 1/4" (6.4 mm) #1, #2 4-7/64"
(104.4 mm)
Yellow/Black 9-7/64"
(231.4 mm)
0.41 lb
(0.19 kg)
Multi-Bit Screwdriver/Nut Drivers
•
Integrated screwdriver/nut driver shaft holds popular tips and converts nut driver sizes
Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Square Bits TORX® Bits Shank Length Handle Color Overall Length Weight
32476 5/16" #1, #2 1/4" (6.4 mm),
3/16" (4.8 mm)
— — 4"
(101.6 mm)
Yellow/Black 7-3/4"
(196.9 mm)
0.48 lb
(0.22 kg)
32477 5/16", 1/4" #1, #2 1/4" (6.4 mm),
3/16" (4.8 mm)
#1, #2 T10, T15 4"
(101.6 mm)
Yellow/Black 7-3/4"
(196.9 mm)
0.50 lb
(0.23 kg)
32500 3/8", 5/16", 1/4" #1, #2 1/4" (6.4 mm),
3/16" (4.8 mm)
#1, #2 T10, T15 3"
(76.2 mm)
Yellow/Black 7-1/4"
(184.2 mm)
0.50 lb
(0.23 kg)
Cat. No. 32476 has 5/16" nut driver only, TORX® is a registered trademark of Acument Intellectual Properties, LLC
Stubby Multi-Bit Screwdriver/Nut Driver
•
Compact design features standard 1-1/4" (32 mm) shaft allowing easy access to tight work spaces
•
Shaft holds four universal tips and converts to two nut driver sizes
32561
Cat. No. Nut Driver Sizes Phillips Bits Slotted Bits Square Bits Shank Length Handle Color Overall Length Weight
32561 1/4", 5/16" #1, #2 3/16" (4.8 mm),
1/4" (6.4 mm)
— 1-17/64"
(32.1 mm)
Yellow/Black 3-13/32"
(86.5 mm)
0.16 lb
(0.07 kg)
32562 1/4", 5/16" #2 3/16" (4.8 mm) #1, #2 1-17/64"
(32.1 mm)
Yellow/Black 3-13/32"
(86.5 mm)
0.16 lb
(0.07 kg)
32476
Multi-Bit Cushion-Grip Screwdrivers/Nut Drivers
Screwdrivers, Nut Drivers and Accessories
See page 310 for additional information on warnings.
58
www.kleintools.com