SDS

Page 4 of 7
Safety Data Sheet for Alkaline 9V Battery (Model: 1604A)
Document Number: SDS101 Revision: 03 Date of prepared: 5 Jan 2017
Remark: “N.A.” is indicated if not applicable.
Storage:
Store product in well-filled, appropriate coated and tightly closed containers avoiding influence of oxygen/air, light
and humidity. Storage at room temperature.
Section
8
–
Exposure Controls/Personal Protection
Exposition/Technical measures: Atmospheric vapour concentrations must be minimized by adequate ventilation.
Protection of hands, eyes and skin: None required under normal use conditions. When handling leaking batteries,
use neoprene, rubber or nitrile gloves and wear safety glasses to protect hands, eyes and skin.
General safety and hygiene measures: Use only as directed.
Section
9
–
Physical and Chemical Propertie
s
Physical state: Stainless steel top battery
Colour: Contents dark and gray in colour
Odour: N.A.
Melting point: N.A.
Boiling point: N.A.
Flash point: N.A.
Explosion limit: Not available
Ignition temperature: Not available
Vapour pressure: Not available
Specific gravity: N.A.
Solubility in water: N.A.
Solubility in other solvents: N.A.
PH value: Not available
Partition coefficient: Not available
Viscosity: Not available
Section 10 – Stability and Reactivity
Stability: Stable under normal use
Thermal decomposition: Batteries may burst and release hazardous decomposition products when exposed to fire.
Substances to avoid: Strong oxidation agents.
Hazardous reactions: Contents incompatible with strong oxidizing agents.
Hazardous decomposition products: Thermal degradation may produce hazardous fumes of zinc and manganese;
hydrogen gas; caustic vapors of potassium hydroxide and other toxic by-products.