Instructions

10
ENGLISH
POWER OVER ETHERNET (PoE) REFERENCE CHARTS
WIRE MAP AND DISPLAY EXAMPLES
NOTE: An open fault or short fault takes precedence
over miswires when the appropriate icon(s) illuminates.
The Split icon illuminates if the cable wiring does not
maintain the designated pairs, an AC signal fault.
PROPERLY WIRED T568A UTP:
Tester
Tester
Tester
Tester
Remote
Remote
Remote
Remote
1 2
3
4
5 6
7
8
ID
Pass
T568A SPLIT PAIRS:
T568A SHORT AND OPEN: T568A MISWIRE & UNRECOGNISED CONTINUITY:
NOTE: Test + Map remote must be used for wire map testing.
8
1
FLASHING
IEEE Standard PoE Power Parameters
Property 802.3af (PoE) 802.3at (PoE+)
Power available at powered device (PD) 12.95 W 25.50 W
Maximum power delivered by powered device (PD) 15.40 W 30.00 W
Voltage range at powered device (PD) 37.0 to 57 V 42.5 to 57 V
Voltage range at powered device (PD) 44.0 to 57 V 50.0 to 57 V
POWER OVER ETHERNET (PoE) REFERENCE CHARTS
Pin
at
Source
TIA/EIA-568
T568B Termination
TIA/EIA-568
T568A Termination
10/100
Mode B
DC on Spares
10/100
Mode A
Mixed DC & Data
1000 (1 GB)
Mode B
DC & Bi-Data
1000 (1 GB)
Mode A
DC & Bi-Data
Data Power Data Power Data Power Data Power
1
Rx+
–
Rx+ DC+
TxRx
A+
–
TxRx
A+
DC+
White/Orange White/Green
2
Rx-
–
Rx- DC+
TxRx
A-
–
TxRx
A-
DC+
Orange Verde
3
Tx+
–
Tx+ DC-
TxRx
B+
–
TxRx
B+
DC-
White/Green White/Orange
4 –
DC+
– –
TxRx
C+
DC+
TxRx
C+
–
Blue Blue
5 –
DC+
– –
TxRx
C-
DC+
TxRx
C-
–
White/Blue White/Blue
6
Tx-
–
Tx- DC-
TxRx
B-
–
TxRx
B-
DC-
Green Orange
7 –
DC-
– –
TxRx
D+
DC-
TxRx
D+
–
White/Brown White/Brown
8 –
DC-
– –
TxRx
D-
DC-
TxRx
D-
–
Brown Brown