Cut Sheet
Table Of Contents
www.kleintools.com
226
Holemaking Products &
Accessories
NOTE:
Read and follow safety instructions in power tool owner's manual.
All dimensions are in inches and (millimeters).
Pulling Grips
Pulling Grips
•
Used to pull wire or cable through walls.
•
Pulling grip attaches to the hole in the tip of the flex bit;
wire mesh holds the wire during the pull.
•
Swivel end helps reduce twisting.
Cat. No. Capacity Maximum Safe Load Weight (lbs.)
KPS050-SEN 1/2" - 9/16" (12 mm - 14 mm) 100 lb .07
KPS075-SEN 3/4" - 1" (19 mm - 25 mm) 185 lb .11
KPS050-SEN
WARNING: Do not exceed maximum safe load as listed on the label
attached to the product.
WARNING:
Always match proper size and type of grip to application.
WARNING: Always inspect equipment before use.
KPS075-SEN
Flexible Drill Bits
Flex Bit Augers
•
Used to drill holes through wood within a wall.
•
Tapered back for easy bit retrieval.
•
Spring steel shaft resists deformation.
•
Screw point tip pulls the bit through wood.
•
Hole in tip allows for use with wire or cable pulling grip.
Cat. No. Length Weight (lbs.)
53716 3/8" x 54" (9.5 mm x 1372 mm) 1.00
53717 3/8" x 72" (9.5 mm x 1829 mm) 1.00
53718
9/16" x 54" (14 mm x 1372 mm) 1.00
53719
3/4" x 54" (19 mm x 1372 mm) 2.00
53751
3/4" x 72" (19 mm x 1829 mm) 2.00
53720
1" x 54" (25 mm x 1829 mm) 2.00
53719
53720
53719
53716
53718
Flex Bit Placement Tool
•
For use with flexible drill bits.
•
Positions flexible drill bits horizontally or vertically
within a wall.
•
Cushion Grip handle for non-slip comfort.
•
Folding design stores more
compactly than standard tool.
53715-SEN
Flex Bit Extensions
•
Connects to the end of a
flex bit and extends the length.
Cat. No. For Use with Flex Bits Length Connection Diameter Weight (lbs.)
53722 3/4" and larger 54" (1372 mm) 5/8" (14 mm) 1.00
53723 9/16" and smaller 54" (1372 mm) 7/16" (11 mm) 1.00
53722
Cat. No. Length Weight (lbs.)
53715-SEN 11" (279 mm) 1.00
See page 296 for additional information on warnings.