Cut Sheet

287287287
www.kleintools.com
See page 296 for additional information on warnings.
All dimensions are in inches and (millimeters).
Steel Construction &
Work@Height Tools
Standard Bull Pins
Bull Pins
Bull Pins with Tether Holes
Cat. No. Top Dia. Point Dia. Length Weight (lbs.)
3251 1-1/16" (27 mm) 3/8" (10 mm) 15" (381 mm) 2.50
3252 1-3/16" (30 mm) 7/16" (11 mm) 15" (381 mm) 3.10
3257 1-1/16" (27 mm) 3/8" (10 mm) 12" (305 mm) 1.70
3258 1-3/16" (30 mm) 7/16" (11 mm) 12" (305 mm) 2.10
3259 1-5/16" (33 mm) 7/16" (11 mm) 12" (305 mm) 2.50
3265 1-1/4" (32 mm) 7/16" (11 mm) 12" (305 mm) 2.50
3255
3252
3255TT
3259TTS
TT1
Broad Head Bull Pin
Cat. No. Top Dia. Point Dia. Length Weight (lbs.)
3255 1-1/4" (32 mm) 5/16" (8 mm) 13-3/4" (349 mm) 2.90
3256 1-1/16" (27 mm) 1/4" (6 mm) 10" (254 mm) 1.60
•
Forged, heat-treated bull pin increases
efficiency by providing a larger striking surface.
•
Angled head and smooth blending of radii increase strength and
reduce the danger of chipping.
•
Below the head, squared-off shoulders have been forged to provide a
surface for applying wrench to loosen wedged bull pins.
•
Added resistance to “mushrooming” permits longer use then
conventional designs and the even taper reduces binding and hang-up.
Note: OSHA 1926.301 (c) specifically states: “Impact tools, such as drift pins, wedges and chisels, shall be kept free of mushroomed heads.”
For additional construction tools, see Mining Tools section
WARNING: Always wear approved personal protective equipment.
•
Machined from quality alloy steel.
•
Heat-treated for strength, black finish for rust resistance.
Why is it important?
In private industry, falling objects accounted for 10% of
worker fatalities in 2013 and are the third leading cause of disabling workplace injuries.
In 2012, falling objects caused 18% of contractor deaths, a 7% increase from 2011.
OSHA ranks being "struck by objects" as the third leading cause of disabling workplace injuries.
Klein Tools’ growing line of tethers and tools for Work@Height are designed to protect
workers on the job site as well as their tools.
Keep your tools close at hand
while working at height.
Work @ Height Tools
Features:
WARNING:
• Inspect for wear before each use.
• Do not use for human support.
• Maximum Working Capacity 10 lbs. (4.5 kg).
Never connect over 5 lbs. (2.3 kg) to a person.
• Do not use around moving or rotating equipment.
WARNING:
• Tether extends to length of 5' (1.5 m). Rig to avoid contact with objects below.
• Always ensure cinch remains snug while in use.
• Always attach carabiner end to anchor point.
• Do not attach tether back onto itself.
• Do not tie knots in tether.
NEW!
NEW!
Cat. No. Max. Load Capacity Relaxed Length Stretched Length Weight (lbs.)
TT1 10 lbs (4.5 kg) 32" (813 mm) 60" (1524 mm) .22
Standard
•
Available with black finish or in
stainless steel for rust resistance.
Cat. No. Type Material Top Dia. Point Dia. Length Weight (lbs.)
3256TT Broad Head Steel 1-1/16" (27 mm) 1/4" (6 mm) 10" (254 mm) 1.48
3255TT Broad Head Steel 1-1/4" (32 mm) 5/16" (8 mm) 13-3/4" (349 mm) 2.78
3259TT Standard Steel 1-5/16" (33 mm) 7/16" (11 mm) 12" (305 mm) 2.50
3259TTS Standard Stainless Steel 1-5/16" (33 mm) 7/16" (11 mm) 12" (305 mm) 2.50
Tool Tether
Broad Head
•
Head design reduces chance of pin slipping
and provides a larger striking surface.
•
Black finish for rust resistance.