Cut Sheet

2
HEAVY INDUSTRYHEAVY INDUSTRY
Brass Sledge Hammers – Fiberglass Rubber Grip Handle
Cat. No. Width Thickness Overall Length Weight
7FWSS10025 1" (25 mm) 5/16" (8 mm) 4" (100 mm) 0.22 lbs (0.10 kg)
Fox Wedges – Steel
7WRP22
•
Used in non-sparking environments or to avoid damage to struck objects.
•
Head forged from brass for softer, non-damaging blow.
•
Head is pinned to handle as well as epoxied to prevent head coming off.
•
Comfortable, thick rubber grip handle for better protection from shock and vibration.
•
Handle includes both overstrike protection and large sweep at base to prevent loss of grip.
Cat. No. Head Weight Overall Length Weight
7HBRFRH04 4 lbs. (1.81 kg) 16" (400 mm) 4.89 lbs. (2.22 kg)
7HBRFRH07 7 lbs. (3.17 kg) 32" (800 mm) 9.87 lbs. (4.48 kg)
7HBRFRH10 10 lbs. (4.53 kg) 36" (900 mm) 12.23 lbs. (5.55 kg)
7HBRFRH14 14 lbs. (6.35 kg) 36" (900 mm) 16.73 lbs. (7.59 kg)
7HBRFRH14
Cat. No. Width Thickness Overall Length Weight
5FW07538 1-1/2" (38 mm) 1/2" (12 mm) 3" (75 mm) 0.35 lbs. (0.16 kg)
5FW10025 1" (25 mm) 5/16" (8 mm) 4" (100 mm) 0.22 lbs. (0.10 kg)
5FW17550 2" (50 mm) 1/2" (12mm) 7" (175 mm) 1.01 lbs. (0.46 kg)
7FW27050 2" (50 mm) 1" (25 mm) 11" (270 mm) 4 lbs. (1.83 kg)
5FW10025
Fox Wedge – Stainless Steel
7FWSS10025
Cat. No. Diameter Shaft Length Weight
7WRP13 1/2" (13 mm) 4-3/4" (120 mm) 2.98 lbs. (1.35 kg)
7WRP16 5/8" (16 mm) 4-3/4" (120 mm) 3.20 lbs. (1.45 kg)
7WRP19 3/4" (19 mm) 4-3/4" (120 mm) 3.64 lbs (1.65 kg)
7WRP22 7/8" (22 mm) 4-3/4" (120 mm) 4.41 lbs. (2.00 kg)
7WRP25 1" (25 mm) 4-3/4" (120 mm) 4.63 lbs. (2.10 kg)
7WRP32 1-1/4" (32 mm) 4-3/4" (120 mm) 5.29 lbs. (2.40 kg)
•
Used for splitting mating surfaces.
•
Also used for leveling machinery and structures before fixing in place.
•
Forged and ground blade with fine edge for easy entry.
•
Used for splitting mating surfaces and for packing machinery and
structures before fixing.
•
Also used in the marine environment because of its corrosion-resistant properties.
•
Forged from stainless steel for greater hardness and non-magnetic properties.
•
Ground blade with fine edge for easy entry.
•
Correctly heat treated to best suit product application.
Hand-Saver Punches
•
Used to safely drive out pins and keys in machinery.
•
Long, two-handed rubber handle to lessen shocks from blows.
•
Head attached with wire rope to reduce shock.
•
Urethane ring around head to reduce likelihood of chipping.
•
Heat-treated punch, so it will not shatter.