Cut Sheet

All dimensions are in inches and (millimeters).
201201201
AUTO
A
AC
CL200
Electrical Test & Measurement
www.kleintools.com
See page 296 for additional information on warnings.
WARNINGS:
To ensure safe operation and service of the tester, follow these instructions. Failure to observe these warnings can result in severe injury or death.
• Before each use, verify meter operation by measuring a known voltage or current.
• Never use the meter on a circuit with voltages that exceed the category based rating of this meter.
• Do not use the meter during electrical storms or in wet weather.
• Do not use the meter or test leads if they appear to be damaged.
• Ensure meter leads are fully seated, and keep fingers away from the metal probe contacts when making measurements.
• Do not open the meter to replace batteries while the probes are connected.
• Use caution when working with voltages above 60V DC, or 25V AC RMS. Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock, replace batteries if a low battery indicator appears.
• Unless measuring voltage or current, shut off and lock out power before measuring resistance or capacitance.
• Always adhere to local and national safety codes. Use individual protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed.
Cat. No. CAT Rating Batteries Jaw Size Height Width Depth Weight Included Accessories
CL110 CAT III 600 V 3 x AAA 1.125"
(29 mm)
8.7"
(221 mm)
3.02"
(77 mm)
1.61"
(41 mm)
10.1 oz.
(285 grams)
Carrying case, test leads and batteries
CL210 CAT III 600 V 3 x AAA 1.125"
(29 mm)
8.7"
(221 mm)
3.02"
(77 mm)
1.61"
(41 mm)
10.1 oz.
(285 grams)
Carrying pouch, test leads, thermocouple
with adapter, and batteries
CL310 CAT III 600 V 3 x AAA 1.125"
(29 mm)
8.7"
(221 mm)
3.02"
(77 mm)
1.61"
(41 mm)
10.1 oz.
(285 grams)
Carrying case, test leads, thermocouple with
adapter, and batteries
CL600 CAT IV 600V 2 x AAA 1.375"
(35 mm)
9.09"
(231 mm)
3.82"
(97 mm)
1.54"
(39 mm)
11.8 oz.
(335 grams)
Carrying case, test leads and batteries
CL700 CAT IV 600V 2 x AAA 1.375"
(35 mm)
9.09"
(231 mm)
3.82"
(97 mm)
1.54"
(39 mm)
11.8 oz.
(335 grams)
Carrying case, test leads, thermocouple with
adapter, and batteries
CL800 CAT IV 600V 2 x AAA 1.375"
(35 mm)
9.09"
(231 mm)
3.82"
(97 mm)
1.54"
(39 mm)
12.5 oz.
(354 grams)
Carrying case, test leads, thermocouple with
adapter, and batteries
Cat. No. Kit Contains Wieight
CL110KIT 15.1 oz. (428 g)
Cat. No. Batteries Height Width Depth Weight
CL110 3 x AAA 8.7"
(221 mm)
3.02"
(77 mm)
1.61"
(41 mm)
10.1 oz.
(285 grams)
RT210 N/A
2.875
(73 mm)
1.625
(41 mm)
1.875
(73 mm)
1.3 oz.
(37 grams)
69409 N/A
4.67"
(119 mm)
2.28"
(58 mm)
1.0"
(25.4 mm)
3.2 oz.
(90.7 grams)
test leads N/A
41"
(1,041 mm)
N/A N/A
3.2 oz.
(90.7 grams)
carry case N/A
9.5"
(241 mm)
3.0"
(76 mm)
2.0"
(25 mm)
15.1 oz.
(428 g)
Clamp Meters
Electrical Maintenance & Test Kit
•
Cat. No RT210 detects the most common wiring problems in standard and GFCI receptacles including
open ground, reverse polarity, open hot, open neutral, and hot/ground reversed.
•
Cat. No. 69409 Line splitter 10x allows the measuring of current draw up to 15A
without splitting the load's power cord.
•
CAT III 600V, Class 2, Double insulation safety rating.
•
Cat. Nos. CL110 clamp meter and 69409 line splitter built to withstand a 3.3' (1 m) drop.
•
Cat. No. CL110 features a backlit display for clear readings.
•
RT210 withstands a 6.6' (2 m).
•
Includes a carrying case, test leads and batteries.
Clamp Meter Specifications
8ZX5
CL110KIT
See information about the CL110 clamp meter on previous page 200.
NEW!