Cut Sheet

RT110
Cat. No. GFCI Height Width Depth Weight
RT110 No 2-7/8" (73.0 mm) 1-7/8" (47.6 mm) 1-5/8" (41.3 mm) 2.0 oz. (57 g)
RT210 Yes 2-7/8" (73.0 mm) 1-7/8" (47.6 mm) 1-5/8" (41.3 mm) 2.0 oz. (57 g)
RT210
69133
Cat. No. Overall Length Weight
69133 43-3/4" (111.3 mm) 0.2 oz. (5.7 g)
Replacement Part
69131 replacement bulb for Cat. No. 69133 0.04 oz. (1.1 g)
69127
Cat. No. Overall Length Weight
69127 43-1/4" (1098.6 mm) 0.2 oz. (5.7 g)
Replacement Part
69130 replacement bulb for Cat. No. 69127 0.01 oz. (0.3g)
Cat. No. Overall Length with Probes Weight
69105 35" (889.0 mm) 2.4 oz. (68 g)
69105
Cat. No. Overall Length Weight
69134 8" (203.2 mm) 0.08 oz. (2.3 g)
69134
Receptacle Testers
Light sequence indicates correct/incorrect wiring
Conforms to UL Std 1436, Certified to CSA Std C22.2 #160
Operating temp: 32°F to 140°F (0°C to 40°C)
Built to withstand a 6.6 ft. (2m) drop
Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet
Designed to detect the most common wiring problems in standard receptacles
Cat. No. RT210 works on GFCI outlets and confirms operation of the ground fault
Circuit Tester
Tests circuits rated from 80 to 600 volts AC/DC
High-visibility neon lamp indicator
High-impact, sealed 5-11/16" (144 mm) probe on long 24" (610 mm)
leads for convenience in testing motors, fuses, relays, switches, etc.
Resistor between each probe and lead
Low-Voltage Twin-Lead Tester
Tests 5-50 volt, AC or DC circuits and components
Built-in lamp glows if circuit is live
Each of the 4-1/2" (114 mm) test leads has an alligator clip on the end
Handy pocket clip
Continuity
Tester
Quickly reveals shorts or broken circuits in all types of
electrical devices and controls
Tests for continuity of circuit with power off
Bulb in handle glows when circuit is complete (bulb included)
Pointed 3-3/4" (95 mm) probe gets right to the problem
Deluxe 4" (102 mm) long handle with removable nylon cap
holds replaceable bulb and battery
36" (915 mm) test lead with alligator clip
Uses one AAA battery (not included)
Proudly built in U.S.A. with global components
Low-Voltage
Tester
Device for checking live 6-24V, AC or DC circuits
Tests for shorts in automotive and truck electrical systems, motor field
coils, radio and low-voltage circuits, ground circuits of all lamps, wiring,
fuses, etc.
Bulb in handle glows when circuit is complete (bulb included)
Pointed 3-3/4" (95 mm) probe makes checking easier
Deluxe 3-1/2" (89 mm) long handle with nylon top holds replaceable bulb
36" (915 mm) test lead with alligator clip
Proudly built in U.S.A. with global components
Electrical Testers
See page 310 for additional information on warnings.
www.kleintools.com
217
Electrical Test & Measurement
AUTO
A
AC
CL200