Cut Sheet
Table Of Contents
109109109
www.kleintools.com
See page 296 for additional information on warnings.
Hex-Key Wrenches
All dimensions are in inches and (millimeters).
Hex-Key Sets
•
Two key positions (straight-out or right angle) for extra leverage.
•
Hex ends are square-cut for a secure full-depth fit and maximum
contact with the hex socket to prevent slippage and stripping of
the socket.
•
Handy sets fit in your pocket or tool box easily and help eliminate
the lost key problem.
•
Made the U.S.A.
Cat. No. Description Handle Length Key Lengths Weight (lbs.)
Hex-Key Sets – Inch
70591 nine-key inch set: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 4-3/8" (112 mm) 2-11/16" – 3-13/16" (67 mm – 97 mm) .50
70581 eight-key inch set: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" 3-1/16" (94 mm) 1-7/8" – 3" (48 mm – 76 mm) .20
70579 five-key inch set: 3/16", 7/32", 1/4", 5/16", 3/8" 5-3/8" (137 mm)
2-11/16" – 3-13/16" (76 mm – 97 mm)
.85
Hex-Key Sets – Metric
70582 seven-key metric set: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm 94 mm (3-11/16") 50 mm – 64 mm (2" – 2-1/2") .35
70580 five-key metric set: 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm 137 mm (5-3/8") 82 mm – 117 mm (2-5/8 – 3-11/16") .85
70579
Folding Hex-Key Sets
Folding TORX
®
Set
•
TORX
®
drive cuts slippage, saves fasteners, efficiently
transmits more torque to the work.
•
Keys are tough, heat-treated chrome-nickel alloy steel for strength and durability.
•
Keys fold flat into handle.
•
Can be used straight out or at an angle for extra leverage.
Cat. No. Handle Length Blade Lengths Contains Weight (lbs.)
70586 4-3/8" (112 mm) 2-13/16" to 3" (56 mm to 76 mm) T10, T15, T20, T25, T27, T30, T40 .30
TORX
®
is a trademark of Acument Intellectual Properties, LLC.
70586
TORX
®
Set
Grip-It
TM
Hex-Key Sets
•
Blades rotate independently up to 270°.
•
Precision fit so hex tool end reduces stripping problems. Keys are industrial
strength, impact-resistant and tested for performance to below freezing.
•
Glass-reinforced nylon handle.
•
Hex ends are square-cut for a secure full-depth fit and maximum contact with
the hex socket to prevent slippage and stripping of the socket
(Cat. Nos. 70570, 70573, 70574, and 70575).
•
Ball design allows for a thicker neck diameter increasing torque capacity,
while maintaining operational angles to 25% (Cat. Nos. 70571 and 70572).
•
Made the U.S.A.
Cat. No. Description Sizes Color Weight (lbs.)
70570 Grip-It
®
hex sets – 5 inch sizes 3/16", 7/32", 1/4", 5/16", 3/8" yellow .58
70571 Grip-It
®
ball hex set – 5 inch sizes 3/16", 7/32", 1/4", 5/16", 3/8" yellow .58
70572 Grip-It
®
ball hex set – 5 metric sizes 5 mm, 6 mm, 7 mm, 8 mm, 10 mm red .58
70573 Grip-It
®
hex sets – 6 inch sizes and
6 metric sizes
5/64", 3/32", 7/64", 1/8", 9/64", 5/32",
1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm
blue .30
70574 Grip-It
®
hex sets – 9 inch sizes 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" yellow .33
70575 Grip-It
®
hex sets – 9 inch sizes .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" yellow .20
70570
Improved
Strength