Offering a variety of tip types, hex sizes, shaft lengths, and handle designs, Klein has the screwdrivers and nut drivers professionals demand to get the job done with comfort and ease of use.
Screwdrivers, Nut Drivers & Accessories Introduction – Screwdrivers, Nut Drivers & Accessories Klein screwdrivers give professionals extra-quality features that have made the Klein name famous for hand tools – features that assure greater convenience, comfort and efficiency in use, plus exceptional strength and durability. All Klein drivers are made of the highest quality tempered steel, carefully heat-treated for maximum strength.
Cushion-Grip Screwdriver Sets Screwdrivers, Nut Drivers & Accessories 8-Piece Screwdriver Set Additional Features: General purpose selection of the most frequently used screwdrivers. Includes two cabinet-tip, two keystone-tip, four Phillips-tip styles. • • Cat. No. 85078 Set Contains Weight (lbs.) 1.65 Cat. No.
Screwdrivers, Nut Drivers & Accessories Cushion-Grip Screwdriver Sets 6-Piece Screwdriver Set Additional Features: General-purpose selection of the most frequently used screwdrivers. Includes one cabinet-tip, two keystone-tip and three Phillips-tip styles. • • Cat. No. Set Contains Weight (lbs.) 85074 1.50 Cat. No.
Cushion-Grip Screwdriver Sets Additional Features Rotating cap for optimum and precise control when working on small equipment. Includes professional custom carrying case. • • Cat. No. Set Contains Weight 85614 .80 Cat. No.
Screwdrivers, Nut Drivers & Accessories Cushion-Grip Screwdriver Sets 2-Piece 10" Long Blade Screwdriver Set Additional Features: Phillips-tip is precision-machined to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers. Precision-ground narrow cabinet-tip permits blade access where space is limited. Ideal for hard-to-reach places where added length is necessary. Includes one Phillips-tip and one cabinet-tip. • • • • Cat. No. 85072 Set Contains Weight (lbs.
Switch Drive System TM NEW! Additional Features: Allows for easy alternating between power tool and hand tool on job site. Quick-Release mechanism converts power tool accessory to hand tool in a snap. Includes Switch Drive™ handle (Cat. No. 32698). • • • IVE R D CH 32700 T SWI Cat. No.
Screwdrivers, Nut Drivers & Accessories Cushion-Grip Screwdrivers Keystone-Tip Screwdrivers – Heavy-Duty Square-Shanks Additional Features: Heavy-duty square shank for wrench-assisted turning. Bolster reinforces shank for hard use. Designed for the most demanding uses. • • • Cat. No. Tip Size 600-4 1/4" (6 mm) 600-6 5/16" (8 mm) Shank Length 4" (102 mm) 6" (152 mm) 600-4 Overall Length Weight (lbs.) 8-11/32" (212 mm) .25 10-15/16" (278 mm) .40 Cat. No.
Cushion-Grip Screwdrivers Additional Feature: Rotating cap for optimum and precise control. 614-6 • Cat. No. Tip Type Tip Size Shank Length Overall Length 5-1/2" (140 mm) .05 614-4 cabinet 1/8" 4" (102 mm) 7-1/2" (191 mm) .05 6-1/2" (165 mm) .05 614-6 cabinet 1/8" 6" (152 mm) 9-1/2" (241 mm) .05 Cat. No. Tip Type Tip Size Shank Length Overall Length Weight (lbs.) 614-2 cabinet 1/16" 2" (51 mm) 613-3 Phillips #0 3" (76 mm) 614-3 cabinet 3/32" 3" (76 mm) 6-1/2" (165 mm) .
Screwdrivers, Nut Drivers & Accessories Cushion-Grip Screwdrivers TORX® Screwdrivers – Round-Shanks Additional Features: TORX® tip drive cuts slippage, saves fasteners and transmits more torque to the work. Color-coded handle ends for quick and easy identification. • • Cat. No. 19542 19543 19544 TORX® Size T15 T20 T25 Color Code yellow green blue Shank Length 4" (102 mm) 4" (102 mm) 4" (102 mm) Overall Length 8-5/16" (211 mm) 8-5/16" (211 mm) 8-5/16" (211 mm) Weight (lbs.) .20 .25 .
Conduit Reamers Cat. No. 85091 19353 SQ2115 Description conduit reamer drill head for 1/2" (13 mm), 3/4" (19 mm), 1" (25 mm) conduit conduit reamer replacement blade #2 square recess replacement bit, 15-pack 85091 Weight (lbs.) .33 lbs. .01 lbs. .01 lbs. NOTE: Read and follow safety instructions in power tool owner’s manual. Conduit-Fitting and Reaming Screwdriver Additional Features: Hooded-blade design keeps tip from slipping out of screws, especially when tightening hard-to-reach conduit fittings.
Screwdrivers, Nut Drivers & Accessories Specialty Cushion-Grip Screwdrivers Terminal Block Screwdriver M# Additional Features: Precision-machined cabinet tip provides exact fit for terminal block screws. Tip is up to 19% stronger than competitors and provides 76% higher torque value than the required ASME B107 Standard. • • Cat. No. 612-4 Shank Tip Width 1/8" (3 mm) 612-4 Shank Length 4" (100 mm) Overall Length 7-3/4" (200 mm) Weight (lbs.) 0.
Multi-Bit Cushion-Grip Screwdrivers/Nut Drivers Cat. No. 32561 32562 Shaft Length 1.27" (32 mm) 1.27" (32 mm) Overall Length 3.4" (86 mm) 3.4" (86 mm) Weight (lbs.) 0.16 0.16 Cat. No. 32561 3/16" 5 mm 1/4" 6 mm 32561 Cat No. 32562 #1 #2 1/4" 3/16" 5 mm 5/16" #2 1/4" #1 5/16" #2 US Patent: D684836 Multi-Bit Screwdrivers/Nut Drivers screwdriver/nut driver shaft holds • Integrated popular tips and converts nut driver sizes. 32477 3/16" 5 mm 32476 3/16" 9/32" 5 mm 7 mm Cat. No.
Screwdrivers, Nut Drivers & Accessories Multi-Bit Screwdrivers/Nut Drivers TM 10-in-1 Folding Screwdriver/Nut Driver • Conveniently folds up for easy storage or to fit into your pocket. • Each driver arm contains four interchangeable bit styles and two nut drivers. • Unfold each driver arm up to a full 180° for straight on driving power, or at 90° for extra leverage on stubborn fasteners. • The quick release button easily unlocks a fully extended driver arm.
Replacement Parts Multi-Bit Screwdriver/Nut Drivers Cat. No.
Journeyman™ Screwdrivers Screwdrivers, Nut Drivers & Accessories Features: Ultra-comfortable tri-lobe handle exceptional control, grip, and balance. Hex-shaped welded bolster offers additional strength between the blade and handle. Precision-machined tip for exact fit into the fastener. Exceptionally hard steel shaft efficiently transfers every bit of torque generated into the tip. Meets or exceeds applicable ASME / ANSI specifications.
Journeyman™ Screwdrivers JSD6K09 Cat. No. JSD4K08 JSD6K09 JSD4C06 JSD6C06 JSD4PH1 JSD4PH2 JSD6PH3 Tip Type keystone keystone cabinet cabinet Phillips Phillips Phillips Tip Size 1/4" (6 mm) 5/16" (8 mm) 3/16" (5 mm) 3/16" (5 mm) #1 #2 #3 Shaft Length 4" (102 mm) 6" (152 mm) 4" (102 mm) 6" (152 mm) 4" (102 mm) 4" (102 mm) 6" (152 mm) Overall Length 9" (228 mm) 11" (279 mm) 8-1/4" (210 mm) 10-1/4" (260 mm) 8-1/4" (210 mm) 9" (228 mm) 11" (279 mm) Weight (lbs.) 0.25 0.35 0.15 0.15 0.15 0.25 0.
Screwdrivers, Nut Drivers & Accessories Plastic-Handle Screwdrivers Pocket-Clip Screwdrivers Additional Features: Specially designed for delicate instrument work. Cat. No. A000 does not have a pocket clip. • • Cat. No. Tip Size A116-4 Shank Length Overall Length Weight (lbs.) 1.5" (38 mm) 1-3/8" (35 mm) 2-7/8" (73 mm) 3-1/4" (82 mm) .02 .
Screw-Holding Screwdrivers Cat. No. SK234 Set Contains Weight (lbs.) .40 Cat. No. Tip Size Shank Size K23 K34 K46 3/16" (5 mm) 3" (76 mm) 1/4" (6 mm) 4" (102 mm) 5/16" (8 mm) 8" 152 mm) SK234 Slotted Plastic Handle Screw-Holding Screwdrivers gripping action holds, starts, and drives • Positive slotted screws in awkward, hard-to-reach places. • Split-blade screw-holding driver wedges into screw slot. • Not designed for torquing or tightening. Cat. No.
Screwdrivers, Nut Drivers & Accessories Specialty Driver Set Reversible Impact-Driver Set • Rugged, hand-impact driver turns rusted, frozen, or other stubborn screws. • Can also be used with 3/8" square-drive impact sockets. spring-loaded, helical design transforms the impact of a hammer • Internal, blow to up to 200 ft.-lbs. of shock torque. • Easily reverses for tightening or loosening screws. • Constructed of high-grade alloy steel that has been heat-treated for added strength.
Cushion-Grip Nut Driver Sets Cat. No. Set Contains 631M Screwdrivers, Nut Drivers & Accessories 7-Piece Magnetic-Tip Hollow-Shaft* Nut Driver Set – 3" (76 mm) Shafts • Full hollow-shaft for long bolts or studs. Weight (lbs.) 1.50 Cat. No.
Screwdrivers, Nut Drivers & Accessories Cushion-Grip Nut Driver Sets 4-Piece Nut Driver Set Additional Features: Standard length for most applications. • Cat. No. Set Contains Weight (lbs.) 633 1.30 Cat. No.
Cushion-Grip Nut Driver Sets NEW! Additional Features: Allows for easy alternating between power tool and hand tool on job site. Quick-Release mechanism converts power tool accessory to hand tool in a snap. Includes Switch Drive™ handle and 3 nut driver sizes. Drivers are impact rated. • • • • IVE R D CH 32701 T SWI Cat. No. 32701 EM ST Y S Hex Sizes 1/4" , 5/16", 3/8" Nut Driver Length 2" (51 mm) Overall Length 7.75" (197 mm) Weight (lbs.) .
Screwdrivers, Nut Drivers & Accessories Cushion-Grip Nut Drivers Sets Hollow-Shaft Nut Drivers – 6" (152 mm) Shafts Additional Features: Reaches into deep recesses. Fits over extra-long bolts and studs. • • 646-1/2 Cat. No. Color Code 646-3/16 646-1/4 646-5/16 646-11/32 646-3/8 black red yellow green blue Hex Size 3/16" 1/4" 5/16" 11/32" 3/8" Shaft Length Overall Length Weight (lbs.) Cat. No.
Plastic-Handle, Hollow-Shaft Nut Driver Sets Smooth Comfordome® handles fit the palm of the hand comfortably. Meets or exceeds applicable ASME / ANSI specifications. Chrome-plated shaft helps prevent corrosion. Handles are color-coded for easy identification. Hollow shafts facilitate work on stacked circuit boards or other long bolt applications. Internal flanges provide solid, twist-resistant shaft anchor.
Screwdrivers, Nut Drivers & Accessories Plastic-Handle, Hollow-Shaft Nut Driver Sets 10-Piece Metric Nut Driver Set With Stand – 3" (76 mm) Shafts Additional Features: White enameled metal stand holds all ten 3"-shaft metric nut drivers. Identification label makes individual size selection easy. • • Cat.No. 70200 Set Contains Weight (lbs.) 1.85 Cat. No. Hex Size Shaft Length Overall Length 70204 70245 70205 70255 70206 70207 70208 70209 70210 70211 4 mm 4.5 mm 5 mm 5.
Plastic-Handle, Nut Drivers Magnetic Nut Drivers – Solid Shafts Additional Features: • • Additional Feature: S86 Reaches into deep recesses. Fits over extra-long bolts and studs. Cat. No. Handle Color Hex Size Shaft Length Overall Length Weight (lbs.
Screwdrivers, Nut Drivers & Accessories Tapping Tools and Awls 6-in-1 Tapping Tool Triple Taps 627-20 forms new threads, re-forms burred threads, • Quickly and cleans out plaster obstructions. • Each tap size rethreads to next larger size if threads are stripped. • Two high-carbon steel taps are secured in reversible holder. forms new threads, re-forms burred • Quickly threads, and cleans out plaster obstructions. tap size rethreads to next larger size if • Each threads are stripped. Cat. No.