Cut Sheet

www.kleintools.com
68
Screwdrivers, Nut Drivers & Accessories
All dimensions are in inches and (millimeters).
Cushion-Grip Screwdrivers
Rapi-Driv
®
Screwdrivers
Additional Features:
•
Crank-action handle spins screws fast with one hand.
•
Saves time and effort, especially on long-threaded screws in switch plates, light fixtures, etc.
670-6
TORX
®
Screwdrivers – Round-Shanks
Additional Features:
•
TORX
®
tip drive cuts slippage, saves fasteners and transmits more torque to the work.
•
Color-coded handle ends for quick and easy identification.
19544
Cat.
No.
TORX
®
Size
Color
Code
Shank
Length
Overall
Length
Weight
(lbs.)
19542 T15 yellow 4" (102 mm) 8-5/16" (211 mm) .20
19543 T20 green 4" (102 mm) 8-5/16" (211 mm) .25
19544 T25 blue 4" (102 mm) 8-5/16" (211 mm) .25
Cat.
No.
TORX
®
Size
Color
Code
Shank
Length
Overall
Length
Weight
(lbs.)
19545 T27 brown 4" (102 mm) 8-5/16" (211 mm) .25
19546 T30 red 4" (102 mm) 8-5/16" (211 mm) .25
TORX
®
is a registered trademark of Acument Intellectual Properties, LLC.
Rapi-Driv
TM
Cushion-Grip Screwdrivers
67100
Interchangeable Rapi-Driv
TM
Additional Features:
•
Interchangeable bit holder allows quick switching between
tip styles and works with other standard size bits.
•
Crank-action handle allows you to spin screws fast with one hand.
•
Blast finish bit provides firm grip on fasteners to reduce cam out.
Cat. No. Contains Shaft Length Overall Length Weight (lbs.)
67100 3/16" (5 mm) slotted, # 2 Phillips 6" (152 mm) 9-3/4" (248 mm) .26
2-in-1 Replacement Bit
Cat. No. Fits Description Quantity Weight (lbs.)
67101
2-in-1 Rapi-Driv
TM
, 10-in-1,
11-in-1 and 10-Fold™
3/16" (5 mm) slotted, # 2 Phillips
replacement bit
contains 2 bits .012
Cat. No. Tip Type Tip Size Shank Length Overall Length Weight (lbs.)
670-3 cabinet 3/16" (5 mm) 4" (102 mm) 7-3/4" (197 mm) .15
670-6 cabinet 3/16" (5 mm) 6" (152 mm) 9-3/4" (248 mm) .20
671-6 cabinet 1/4" (6 mm) 6" (152 mm) 9-3/4" (248 mm) .20
681-6 Phillips #1 6" (152 mm) 9-3/4" (248 mm) .20
682-6 Phillips #2 6" (152 mm) 9-3/4" (248 mm) .25
691-6 square-recess #1 6" (152 mm) 9-3/4" (248 mm) .35
692-6 square-recess #2 6" (152 mm) 9-3/4" (248 mm) .35
Demolition Screwdrivers
Additional Features:
603-4DD
•
Engineered, manufactured and tested
for prying, chiseling and punching
•
Plated metal strike cap to protect
handle from hammer blows.
•
Heat treated metal shaft runs complete
length of handle to metal strike cap to
transfer metal strike force.
602-7DD
Cat. No. Tip Type Tip Size Blade Length Overall Length Weight (lbs.)
602-4DD keystone 1/4" (6 mm) 4" (102 mm) 9" (229 mm) .37
602-7DD keystone 5/16" (8 mm) 7" (178 mm) 12-3/8" (314 mm) .56
603-4DD Phillips #2 7" (178 mm) 9" (229 mm) .37
NEW!
NEW!
See page 310 for additional information on warnings.