Cut Sheet
Table Of Contents
- Introduction
- Cushion-Grip Screwdriver Sets
- Switch Drive Handle Systems
- Cushion-Grip Screwdrivers
- Multi-Bit
- Replacement Parts
- Magnetic Screwdriver Bit Set
- Journeyman™ Screwdrivers
- Plastic-Handle Screwdrivers
- Screw-Holding
- Specialty Driver Set
- Torque
- Cushion-Grip Nut Driver Sets
- Switch Drive Nut Driver Handle System
- Cushion-Grip Nut Drivers
- Plastic-Handle Nut Drivers
- Tapping Tools and Awls
- Spring Tools
www.kleintools.com
7777
Screwdrivers, Nut Drivers
& Accessories
All dimensions are in inches and (millimeters).
Screw-Holding Screwdrivers
3-Piece Slotted Plastic Handle Screw-Holding Screwdriver Set
•
Not designed for torquing or tightening.
Cat. No. Set Contains Weight (lbs.)
SK234 .40
Cat.
No.
Tip
Size
Shank
Size
K23 3/16" (5 mm) 3" (76 mm)
K34 1/4" (6 mm) 4" (102 mm)
K46 5/16" (8 mm) 8" 152 mm)
SK234
Slotted Plastic Handle
Screw-Holding Screwdrivers
•
Positive gripping action holds, starts, and drives
slotted screws in awkward, hard-to-reach places.
•
Split-blade screw-holding driver wedges into screw slot.
•
Not designed for torquing or tightening.
†
Precision blade for use with small precision screws. Blade thickness
of .028" expanding to .045".
‡
Blade thickness of .043" expanding to .085".
Note: K21 and K23 have pocket clips.
K36
Cat.
No.
Tip
Size
Shank
Length
Overall
Length
Weight
(lbs.)
K21
†
1/16" (15 mm) 3" (76 mm) 5-1/4" (133 mm) .05
K23 3/16" (5 mm) 3" (76 mm) 5-1/4" (133 mm) .05
K28 3/16" (5 mm) 8" (203 mm) 10-1/4" (260 mm) .10
K34
‡
1/4" (6 mm) 4" (102 mm) 7-3/4" (197 mm) .10
K36
‡
1/4" (6 mm) 6" (152 mm) 9-3/4" (247 mm) .15
Cat.
No.
Tip
Size
Shank
Length
Overall
Length
Weight
(lbs.)
K38‡ 1/4" (6 mm) 8" (203 mm) 11-3/4" (298 mm) .20
K44 5/16" (8 mm) 4" (102 mm) 8-1/4" (209 mm) .25
K46 5/16" (8 mm) 6" (152 mm) 10-1/4" (260 mm) .25
K48 5/16" (8 mm) 8" (203 mm) 12-1/4" ( 311 mm) .30
Phillips-Tip Screw-Holding Screwdrivers
•
Positive gripping action holds and starts Phillips
screws in awkward, hard-to-reach places.
•
Blade separates to hold the fastener.
•
Not designed for torquing or tightening.
Cat. No. Overall Length Weight (lbs.)
K14 5" (127 mm) with pocket clip .05
K16 7" (178 mm) .05
K19 9" (229 mm) .05
K16
Offset Screwdrivers
Offset Screwdrivers
•
Designed for confined hard-to-reach applications.
•
Two tip sizes for added convenience.
Cat.
No.
Tip
Type
Tip
Size
For
Screw Nos.
Overall
Length
Weight
(lbs.)
V01 cabinet 3/16" (5 mm) 2 to 6 3" (76 mm) .01
V03 cabinet 5/16" (8 mm) 8 to 12 5" (127 mm) .11
V04 cabinet 3/8" (10 mm) 12 to 16 6" (152 mm) .25
P340 Phillips #3 & #4 N/A 6" (152 mm) .20
V05 cabinet
Phillips
1/4" (6 mm)
#2
1/4" (6 mm) cabinet
#2 Phillips
5" (127 mm) .05
V01
V05
P340
See page 310 for additional information on warnings.