Cut Sheet
Table Of Contents
- Introduction
- Cushion-Grip Screwdriver Sets
- Switch Drive Handle Systems
- Cushion-Grip Screwdrivers
- Multi-Bit
- Replacement Parts
- Magnetic Screwdriver Bit Set
- Journeyman™ Screwdrivers
- Plastic-Handle Screwdrivers
- Screw-Holding
- Specialty Driver Set
- Torque
- Cushion-Grip Nut Driver Sets
- Switch Drive Nut Driver Handle System
- Cushion-Grip Nut Drivers
- Plastic-Handle Nut Drivers
- Tapping Tools and Awls
- Spring Tools
www.kleintools.com
82
Screwdrivers, Nut Drivers
& Accessories
All dimensions are in inches and (millimeters).
Cushion-Grip Nut Drivers Sets
Hollow-Shaft Nut Drivers – 6" (152 mm) Shafts
Additional Features:
•
Reaches into deep recesses.
•
Fits over extra-long bolts and studs.
646-1/2
Cat. No. Color
Code
Hex
Size
Shaft
Length
Overall
Length
Weight
(lbs.)
646-3/16 black
3/16"
6" (152 mm) 9-3/4" (248 mm) .25
646-1/4 red
1/4"
6" (152 mm) 9-3/4" (248 mm) .25
646-5/16 yellow
5/16"
6" (152 mm) 9-3/4" (248 mm) .25
646-11/32 green 11/32" 6" (152 mm) 9-3/4" (248 mm) .25
646-3/8 blue 3/8" 6" (152 mm) 9-3/4" (248 mm) .30
Cat. No. Color
Code
Hex
Size
Shaft Length Overall
Length
Weight
(lbs.)
646-7/16 brown
7/16"
6" (152 mm) 10-5/16" (262 mm) .35
646-1/2 red
1/2"
6" (152 mm) 10-5/16" (262 mm) .35
646-9/16 orange
9/16"
6" (152 mm) 11-3/8" (289 mm) .40
646-5/8 yellow
5/8"
6" (152 mm) 11-3/8" (289 mm) .40
Drive-A-Matic Nut Driver
Additional Features:
•
Automatically fits 15 different nut and screw sizes.
•
Hex head adjusts to the proper size as you turn it.
•
Will drive or loosen hex nuts from 1/4" (6 mm) to 7/16"
(11 mm), hex-head screws from No. 6 to 1/4" (6 mm),
and socket-head cap screws from No. 8 to 5/16" (8 mm).
632
Cat. No. Overall
Length
Weight
(lbs.)
632
7" (178 mm) when open, 6-3/4" (171 mm) when closed
.35
WARNING:
NOT insulated. Coating is intended for protection of circuits only.
Coated Hollow-Shaft Nut Drivers
Additional Features:
•
Entire shaft plastic coated for circuit protection only. NOT INSULATED.
•
Special plastic coating resists cutting, cracking and chipping.
•
Thin coating permits use in confined areas.
Cat. No. Color
Code
Hex
Size
Shaft
Length
Overall
Length
Weight
(lbs.)
640-3/16 black
3/16"
3" (76 mm) 6-3/4" (171 mm) .25
640-1/4 red
1/4"
3" (76 mm) 6-3/4" (171 mm) .25
640-5/16 yellow
5/16"
3" (76 mm) 6-3/4" (171 mm) .25
640-3/8 blue 3/8" 3" (76 mm) 6-3/4" (171 mm) .25
640-7/16 brown
7/16"
3" (76 mm) 7-5/16" (186 mm) .30
640-1/2 red
1/2"
3" (76 mm) 7-5/16" (186 mm) .25
640-9/16 orange
9/16"
4" (102 mm) 9-3/8" (238 mm) .40
640-5/8 yellow 5/8" 4" (102 mm) 9-3/8" (238 mm) .40
640-1/2
Magnetic-Tip Hollow-Shaft* Nut Drivers
Additional Feature:
•
Exclusive hollow shaft* design with Rare Earth magnetic
tip features unobstructed pass-through, even on long bolts.
630-3/8M
Cat. No. Color
Code
Hex
Size
Shaft
Length
Overall
Length
Weight
(lbs.)
610-1/4M red 1/4" 3" (76 mm) 1-1/2" (89 mm) .10
610-5/16M yellow 5/16" 3" (76 mm) 1-1/2" (89 mm) .10
610-3/8M blue 3/8" 3" (76 mm) 1-1/2" (89 mm) .10
630-3/16M* black 3/16" 3" (76 mm) 6-3/4" (171 mm) .20
630-1/4M red 1/4" 3" (76 mm) 6-3/4" (171 mm) .20
630-5/16M yellow 5/16" 3" (76 mm) 6-3/4" (171 mm) .20
630-11/32M green 11/32" 3" (76 mm) 6-3/4" (171 mm) .20
630-3/8M blue
3/8"
3" (76 mm) 6-3/4" (171 mm) .20
630-7/16M brown
7/16"
3" (76 mm) 7-5/16" (186 mm) .25
Cat. No. Color
Code
Hex
Size
Shaft
Length
Overall
Length
Weight
(lbs.)
646-3/16M* black 3/16" 6" (152 mm) 9-3/4" (248 mm) .25
646-1/4M red 1/4" 6" (152 mm) 9-3/4" (248 mm) .25
646-5/16M yellow 5/16" 6" (152 mm) 9-3/4" (248 mm) .25
646-11/32M green 11/32" 6" (152 mm) 9-3/4" (248 mm) .25
646-3/8M blue
3/8"
6" (152 mm) 9-3/4" (248mm) .30
646-7/16M brown
7/16"
6" (152 mm) 10-5/16" (262 mm) .35
646-1/2M red 1/2" 6" (152 mm) 10-5/16" (262 mm) .35
618-1/4M red 1/4" 18" (457 mm) 21-3/4" (552 mm) .50
618-5/16M yellow 5/16" 18" (457 mm) 21-3/4" (552 mm) .50
*3/16" magnetic nut driver does not have a hollow shaft.
See page 310 for additional information on warnings.