Cut Sheet
Table Of Contents
- Wire Pulling Grips
- Recommended Care and Maintenance
- Types of Wire Pulling Grips
- Warnings
- Types of Jaw Contours
- Selecting the Proper Grip
- ACSR (Aluminum Conductor Steel Reinforced)
- ACSR (Aluminum Conductor Steel Reinforced)
- ACSS (Aluminum Conductor Steel Supported)
- ACSS/TW (Aluminum Conductor Steel Supported/Trapezoidal Wire)
- AAC (All Aluminum Conductor)
- Chicago™ Grips
- 1656 Series
- 1628-16P Series
- 1628-30 and 1628-40 Series
- 1628-50 Series
- Dual Conductor
- Aircraft Cable, EHS (Extra-High-Strength),Messenger and Guy Strand-1613, 1628,1684 and 1692 Series
- Weatherproof Stranded and Solid Cable -1611 Series
- Bare Wire-1613 Series
- PVC-Covered Cable -1659 Series
- Bell System B, L, and H-1628,1659, 1684 & 1692 Series
- Steel Strand – Haven's™ Grips
- Wire Mesh Grips
D
20,000 lbs. (9,072 kg) Maximum Safe Load
E
25,000 lbs. (11,340 kg) Maximum Safe Load
F
25,000 lbs. (11,340 kg) Maximum Safe Load
with bolt on jaw
1628-40
1628-30 and 1628-40 Series
•
Round jaws are shaped to provide maximum contact with the cable, virtually eliminating cable deformation
•
These grips are special order only; please allow 30 days for delivery; special order grips are not returnable
1628-30
Cat. No. Cable Diameter Range Jaw Length Weight
162830N 0.83" to 0.89" (21.06 to 22.61 mm) 10-3/4" (273.05 mm) 27.0 lb (12.3 kg)
162830O 0.89" to 0.96" (22.63 to 24.21 mm) 10-3/4" (273.05 mm) 27.0 lb (12.3 kg)
162830P 0.95" to 1.02" (24.23 to 25.78 mm) 10-3/4" (273.05 mm) 27.0 lb (12.3 kg)
162830R 1.02" to 1.08" (25.81 to 27.38 mm) 10-3/4" (273.05 mm) 27.0 lb (12.3 kg)
162830S 1.08" to 1.14" (27.41 to 28.96 mm) 10-3/4" (273.05 mm) 27.0 lb (12.3 kg)
162830T 1.14" to 1.20" (28.95 to 30.55 mm) 10-3/4" (273.05 mm) 27.0 lb (12.3 kg)
162830U 1.21" to 1.26" (30.7 to 32 mm) 10-3/4" (273.05 mm) 27.0 lb (12.3 kg)
Cat. No. Cable Diameter Range Jaw Length Weight
162840U 1.20" to 1.26" (30.48 to 32 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162840W 1.27" to 1.32" (32.25 to 33.52 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162840X 1.33" to 1.39" (33.78 to 35.30 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162840Y 1.39" to 1.45" (35.30 to 36.83 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162840Z 1.45" to 1.52" (36.83 to 38.6 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162840A 1.52" to 1.58" (38.6 to 40.13 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
Cat. No. Cable Diameter Range Jaw Length Weight
1628-50P 0.95" to 1.02" (24.23 to 25.78 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
1628-50R 1.02" to 1.08" (25.91 to 27.43 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850S 1.08" to 1.14" (27.41 to 28.96 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850T 1.14" to 1.20" (28.95 to 30.55 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850U 1.20" to 1.27" (30.48 to 32.25 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850W 1.27" to 1.33" (32.25 to 33.78 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850X 1.33" to 1.39" (33.78 to 35.30 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850Y 1.39" to 1.45" (35.30 to 36.83 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850Z 1.45" to 1.52" (36.83 to 38.6 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850A 1.52" to 1.58" (38.6 to 40.13 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850B 1.58" to 1.64" (40.13 to 41.65 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850C 1.64" to 1.70" (41.65 to 43.18 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850D 1.70" to 1.77" (43.18 to 44.95 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850E 1.77" to 1.83" (44.95 to 46.48 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
162850F 1.83" to 1.89" (46.48 to 48 mm) 10-3/4" (273.05 mm) 34.0 lb (15.5 kg)
1628-50 Series
•
Removable bolt on floating jaw, secured by a slotted nut and cotter pin. Jaw provides increased cable coverage
•
Cat. No. 555 replacement bolt available
•
NOTE: Jaw must be removed to insert cable
•
These grips are special order only; please allow 30 days for delivery; special order grips are not returnable
1628-50
Chicago
™
Grips
See Wire Pulling Grip Warnings on page 255
www.kleintools.com
264
Wire Pulling Grips