Cut Sheet
Table Of Contents
- Recommended Care and Maintenance
- Types
- Warnings
- Types of Jaw Contours
- Selecting the Proper Grip
- ACSR (Aluminum Conductor Steel Reinforced)
- ACSS (Aluminum Conductor Steel Supported)
- AAC (All Aluminum Conductor)
- Chicago™ Grips
- Steel Strand – Haven's™ Grips
- Parallel Jaw Grips
- Interchangeable Jaw Grips & Liners
- Accessories
- Wire Mesh Grips
1656 Series
•
Round, smooth inside jaw contour on this
series of grips is ideal for bare ACSR
•
Smooth jawed grips with maximum contact
are less likely to cause cable deformation
1656-30
1656-40
A
4,500 lbs. (2,041 kg) Maximum Safe Load
Cat. No. Hot Latch Model No. Hot Latch/Spring Model No. Cable Diameter Jaw Length Weight
1656-20 1656-20H S1656-20H 0.20" to 0.40" (5.08 to 10.16 mm) 4" (101.6 mm) 3.0 lbs. (1.36 kg)
1656-30 1656-30H S1656-30H 0.31" to 0.53" (7,.87 to 13.46 mm) 4-3/4" (120.7 mm) 3.8 lbs. (1.70 kg)
Cat. No. Hot Latch Model No. Hot Latch/Spring Model No. Cable Diameter Jaw Length Weight
1656-40 1656-40H S1656-40H 0.53" to 0.74" (13.46 mm to 18.80 mm) 5-1/2" (139.7 mm) 8.3 lbs. (3.76 kg)
1656-50 1656-50H S1656-50H 0.74" to 0.86" (18.80 to 21.84 mm) 5-1/2" (139.7 mm) 8.3 lbs. (3.76 kg)
1656-60 1656-60H S1656-60H 0.86" to 0.96" (21.84 to 24.38 mm) 5-1/2" (139.7 mm) 8.3 lbs. (3.76 kg)
B
8,000 lbs. (3,629 kg) Maximum Safe Load
1628-16P and 1628-30 Series
•
Round jaws are shaped to provide maximum contact with the cable,
virtually eliminating cable deformation
•
Designed for large-diameter ACSR cables
•
These grips are special order only; please allow 30 days for delivery;
special order grips are not returnable
1628-16P
Cat. No. Cable Diameter Range Jaw Length Weight
162816PE 0.31" to 0.33" (7.87 to 8.38 mm) 7-1/4" (184.15 mm) 17.0 lbs. (7.73 kg)
162816PF 0.33" to 0.39" (8.38 to 9.90 mm) 7-1/4" (184.15 mm) 17.0 lbs. (7.73 kg)
162816PG 0.40" to 0.45" (9.93 to 11.50 mm) 7-1/4" (184.15 mm) 17.0 lbs. (7.73 kg)
162816PH
‡
0.46" to 0.52" (11.53 to 13.08 mm) 7-1/4" (184.15 mm) 17.0 lbs. (7.73 kg)
162816PI 0.52" to 0.58" (13.11 to 14.68 mm) 7-1/4" (184.15 mm) 17.0 lbs. (7.73 kg)
162816PJ 0.58" to 0.64" (14.71 to 16.25 mm) 7-1/4" (184.15 mm) 17.0 lbs. (7.73 kg)
162816K 0.64" to 0.70" (16.28 to 17.86 mm) 7-1/4" (184.15 mm) 17.0 lbs. (7.73 kg)
162816PL 0.71" to 0.76" (17.89 mm -19.43 mm) 7-1/4" (184.15 mm) 17.0 lbs. (7.73 kg)
162816PM 0.77" to 0.82" (19.46 to 21.03 mm) 7-1/4" (184.15 mm) 17.0 lbs. (7.73 kg)
162816PN 0.83" to 0.89" (21.06 to 22.61 mm) 7-1/4" (184.15 mm) 17.0 lbs. (7.73 kg)
‡ The "H" suffix does not mean Hot Latch, this is only for Cat. No. 1628-16PH.
1628-30
C
15,000 lbs. (6,803 kg) Maximum Safe Load
D
20,000 lbs. (9,072 kg) Maximum Safe Load
Cat. No. Cable Diameter Range Jaw Length Weight
162930N 0.83" to 0.89" (21.06 to 22.61 mm) 10-3/4" (273.05 mm) 27.0 lbs. (12.27 kg)
162830O 0.89" to 0.96" (22.63 to 24.21 mm) 10-3/4" (273.05 mm) 27.0 lbs. (12.27 kg)
Chicago
™
Grips
See Wire Pulling Grip Warnings on page 273
www.kleintools.com
281
Wire Pulling Grips