Cut Sheet
Table Of Contents
- Wire Pulling Grips
- Recommended Care and Maintenance
- Types of Wire Pulling Grips
- Warnings
- Types of Jaw Contours
- Selecting the Proper Grip
- ACSR (Aluminum Conductor Steel Reinforced)
- ACSR (Aluminum Conductor Steel Reinforced)
- ACSS (Aluminum Conductor Steel Supported)
- ACSS/TW (Aluminum Conductor Steel Supported/Trapezoidal Wire)
- AAC (All Aluminum Conductor)
- Chicago™ Grips
- 1656 Series
- 1628-16P Series
- 1628-30 and 1628-40 Series
- 1628-50 Series
- Dual Conductor
- Aircraft Cable, EHS (Extra-High-Strength),Messenger and Guy Strand-1613, 1628,1684 and 1692 Series
- Weatherproof Stranded and Solid Cable -1611 Series
- Bare Wire-1613 Series
- PVC-Covered Cable -1659 Series
- Bell System B, L, and H-1628,1659, 1684 & 1692 Series
- Steel Strand – Haven's™ Grips
- Wire Mesh Grips
1613-35
PVC-Covered Cable -1659 Series
•
Specially machined serpentine jaws allow insulated
conductor to be inserted through jaws
•
Eliminates necessity of stripping insulation from conductor
•
Round inside-jaw contour
Serpentine
Jaw
1659-30
Bare Wire-1613 Series
•
Designed for working with solid and stranded bare
wire from 0.08" (2 mm) to 0.20" (5.1 mm)
•
Lightweight, cost-effective grip
•
Single “V” groove jaw
•
Cat. Nos. 1613-35 and 1613-35H pulls #6 and #8 bare
copper wire without damaging or deforming the cable
1613-30
Weatherproof Stranded and Solid Cable -1611 Series
•
Round inside jaw contour for weatherproof coated wire
•
Notches in jaw provide firm grip on insulation
1611-30
Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable.
Notched
Jaw
Cat. No. Cable Diameter Hot Latch Spring Locking Handle Jaw Length Weight
4,500 lbs. (2,041 kg) Maximum Safe Load
1611-20 0.20" to 0.40"
(5.08 to 10.16 mm)
—
• •
4-3/16"
(106.4 mm)
2.6 lb
(1.2 kg)
1611-30 0.31" to 0.53"
(7.87 to 13.46 mm)
—
• •
4-3/4"
(120.7 mm)
3.4 lb
(1.5 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load
1611-40 0.53" to 0.70"
(13.46 to 17.78 mm)
—
• •
5-11/16"
(144.5 mm)
7.4 lb
(3.4 kg)
1611-50 0.74" to 0.86"
(18.80 to 21.84 mm)
—
• •
5-11/16"
(144.5 mm)
7.4 lb
(3.4 kg)
Cat. No. Cable Diameter Hot Latch Spring Locking Handle Jaw Length Weight
1,500 lbs. (680 kg) Maximum Safe Load
1613-30 0.08" to 0.20"
(2.03 mm to 5.08 mm)
—
• •
3"
(76.2 mm)
1.5 lb
(0.7 kg)
4,500 lbs. (2,041 kg) Maximum Safe Load
1613-35 #8 AWG Bare Copper to
#6 AWG Bare Copper
—
• •
4-3/16"
(106.4 mm)
2.9 lb
(1.3 kg)
161335H #8 AWG Bare Copper to
#6 AWG Bare Copper
• • •
4-3/16"
(106.4 mm)
2.8 lb
(1.3 kg)
Cat. No. Cable Diameter Hot Latch Spring Locking Handle Jaw Length Weight
4,500 lbs. (2,041 kg) Maximum Safe Load
1659-20 0.20" to 0.42"
(5.08 to 10.67 mm)
—
• •
4-3/16"
(106.4 mm)
2.6 lb
(1.2 kg)
1659-30 0.31" to 0.50"
(7.87 to 12.70 mm)
—
• •
4-3/4"
(120.7 mm)
3.3 lb
(1.5 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load
1659-40 0.49" to 0.79"
(12.45 to 20.07 mm)
—
• •
5-11/16"
(144.5 mm)
7.7 lb
(3.5 kg)
1659-50 0.79" to 1.01"
(20.07 to 25.65 mm)
—
• •
5-11/16"
(144.5 mm)
7.3 lb
(3.3 kg)
Chicago
™
Grips
See Wire Pulling Grip Warnings on page 255
www.kleintools.com
266
Wire Pulling Grips