INTRODUCTION Thank you so much for choosing the KLH Model Three loudspeaker. KLH’s Model Three is an innovative, compact system that rivals the largest loudspeakers. The mid-century modern speaker reflects the iconic styling and musical integrity unique to the KLH brand while providing a solution for music enthusiasts with smaller listening spaces.
WHAT IS IN THE CARTON? The carton contains one Model Three speaker, one grille, one slant riser base, and one user’s manual for your convenience. SUSTAINABLE MATERIALS The Model Three does not utilize much plastic material in its construction or packaging. Where possible, KLH has elected to use more responsible materials, resulting in a product more in line with modern environmental sensitivities.
UNPACKING THE MODEL THREE On Moe K L Ac del H T Lo ous hre t Syuds ic S e st pe us em ak pe er ns i on al nu De s in ign No ed ble an sv d E ille ng , IN in e Ma se er Ba Ris ree l Th er de Mo speak ud Lo er ed ed eer gin En A and IN, US ned lle, China sig De blesvi d in ure in No act t: nuf igh Ma We al Tot All components of the Model Three system are packaged carefully for maximum protection against damage.
PLACING THE MODEL THREE ON SLANT RISER SPEAKER CONNECTION IMPORTANT! Turn your amplifier or receiver OFF before connecting your speakers. This action will avoid damage that could result from accidental shorting of the speaker cables. You can use bare wire or banana, pin, or spade connectors with your loudspeaker binding posts. Tighten the posts firmly by hand but do not over tighten! Correct polarity (or phase) is critical for proper imaging and bass performance.
MODEL THREE POSITIONING AND ROOM ACOUSTICS Room acoustics play a huge role in the sound reproduction characteristics of your Model Three loudspeakers. Experimenting with loudspeaker placement is a necessary step for optimum acoustic performance. Fortunately, the Model Three is very placement-friendly, and there are only a couple of factors that you need to keep in mind: 1. Low frequencies (below 400Hz) are heavily influenced by the loudspeaker's position relative to the boundaries of the listening room. 2.
THREE-POSITION ACOUSTIC BALANCE SWITCH The selector switch located on the back of each loudspeaker allows users to tailor the output above 400Hz. “HI” Position – This is the default position or 0dB. It is the preferred selection for neutral to dead listening spaces. “MID” Position – This adjusts the loudspeaker -1.5dB above 400Hz. Use this setting for slightly live listening spaces. “LO” Position – This adjusts the loudspeaker -3.0dB above 400Hz.
HOW TO EVALUATE STEREO LOUDSPEAKERS FOR SOUND AND ACCURACY It is time to listen to the loudspeakers and evaluate their performance. Since the listening room contributes half of what you hear, proper evaluation and positioning adjustments are required to ensure the most rewarding listening experience. A little work here will go a long way. You want to start with a variety of music composed of tunes with which you are most familiar.
CLEANING Your Model Three speakers feature a genuine wood veneer. The finish is a low-gloss clear lacquer that only requires an occasional soft damp cloth. Be sure to clean with the grain, avoiding a circular or cross-grain motion. Do not use an abrasive cleaner. Avoid getting any part of the speaker components wet. Do not place wet objects (drinking glasses, potted plants, etc.) on top of your speakers—if allowed to soak in, even the smallest amount of water may permanently damage the loudspeaker finish.
SPECIFICATIONS (all specifications for a single speaker) Frequency Response: Low Frequency Extension: In-Room Sensitivity: Free-field Sensitivity: Power Handling: Recommended Power Amplification: In-Room Maximum SPL: Impedance: Horizontal Dispersion: Features: Crossover Frequency: High Frequency Driver: Low Frequency Driver: Enclosure Material: Inputs: Height: Width: Depth: Weight: Included Accessories: Specifications subject to change without notice. 46Hz – 20,000Hz +/- 3dB -10dB @ 35Hz 88dB @2.
984 LOGAN STREET, NOBLESVILLE, IN 46060 klhaudio.