Owner's Manual

THREE-POSITION ACOUSTIC BALANCE SWITCH
The selector switch located on the back of each loudspeaker allows users to tailor the output
above 400Hz.
“HI” Position – This is the default position or 0dB. It is the preferred selection for neutral to
dead listening spaces.
“MID” Position – This adjusts the loudspeaker -1.5dB above 400Hz. Use this setting for slightly
live listening spaces.
“LO” Position – This adjusts the loudspeaker -3.0dB above 400Hz. Use this setting for very live
listening spaces (for example, a room with a tile oor).
Of course, the selection is up to the user, and the user may want to experiment to determine
the best selection for their listening taste. Please remember to set both speakers to the same
setting; otherwise, a poor center image will result.
100Hz 1000Hz400Hz 10kHz 20kHz
-3dB
-10
0dB
10
-1.5dB
DECIBELS