Service Manual

Table Of Contents

 Indoor Unit Disassembly 13 

2.3 Evaporator

Note: Remove the front panel and electrical parts (refer to 1. Front panel and 2. Electrical parts) before

disassembling evaporator.

Procedure Illustration

1) Disassemble the pipe holder located at the

rear of the unit (see Fig. 23).

2) Remove the 1 screws on the evaporator

located at the ﬁ xed plate (see Fig. 24).

Fig. 23

Fig. 24

Note: This section is for reference only. Actual unit appearance may vary.