Service Manual

Table Of Contents

 Indoor Unit Disassembly 15 

2.4 Fan motor and fan

Note: Remove the front panel, electrical parts and evaporator (refer to 1. Front panel, 2. Electrical parts, and

3. Evaporator). before disassembling fan motor and fan.

Procedure Illustration

1) Remove the two screws and remove the

ﬁ xing board of the fan motor (see Fig. 28).

2)�Remove the bearing sleeve (see Fig. 29)

Fig. 28

Fig. 29

Note: This section is for reference only. Actual unit appearance may vary.

Screws