AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION Thank you very much for purchasing our products. Please read this manual carefully before using the remote controller.
CONTENTS Remote controller Specifications................................................... 2 Operation buttons .................. ......................................................... 3 Indicators on LCD .......................................................................... 6 How to use the buttons ................................................................. 7 Auto operation................................................................................. 7 Cooling/Heating/Fan operation.
Remote Controller Specifications Model RG57A6/BGEFU1 Rated Voltage 3.
Operation of buttons 1 ON/OFF Button This button turns the air conditioner ON and OFF. MODE Button Press this button to modify the air conditioner mode in a sequence of following: 2 AUTO COOL DRY HEAT FAN NOTE：Please do not select HEAT mode if the machine you purchased is cooling only type. Heat mode is not supported by the cooling only appliance.
Operation of buttons 7 UP Button( ) Push this button to increase the indoor o o temperature setting in 1F increments to 86F. DOWN Button( ) Push this button to decrease the indoor o o temperature setting in 1F increments to 62F. NOTE：Temperature contol is not available in Fan mode. NOTE: Press and hold UP and DOWN buttons together for 3 seconds will alternate the temperO ature display between the C & FO scale.
Operation of buttons 10 TIMER OFF Button Press this button to initiate the auto-off time sequence. Each press will increase the auto -timed setting in 30 minutes increments. When the setting time displays 10.0, each press will increase the auto-timed setting 60 minutes increments. To cancel the autotimed program, simply adjust the auto-off time to 0.0 11 SWING Button Used to stop or start horizontal louver auto swing feature.
Indicators on LCD Information are displayed when the remote controller is powered up. Mode display AUTO COOL HEAT FAN DRY Displayed when data transmitted. Displayed when remote controller is ON. Battery display(low battery detection) Not available for this unit Displayed when TIMER ON time is set. Displayed when TIMER OFF time is set. Show set temperature or room temperature, or time under TIMER setting. Displayed in Sleep Mode operation.
How to use the buttons Auto operation 2 3 ON/OFF SILENCE FP 1 MODE TIMER ON NOTE 1. In the Auto mode, the air conditioner can logically choose the mode of Cooling, Fan, and Heating by sensing the difference between the actual ambient room temperature and the setting temperature on the remote controller. 2. In the Auto mode, you can not switch the fan speed. It has already been automatically controlled. 3. If the Auto mode is not comfortable for you , the desired mode can be selected manually.
How to use the buttons Dehumidifying operation 2 3 ON/OFF 1 MODE SILENCE FP Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing. 1. Press the MODE button to select DRY mode. 2. Press the UP/DOWN buttons to set the desired temperature. The temperature can be set within a range of 62 OF~ 86 OF in 1 OF increments. 3. Press the ON/OFF button to start the air conditioner.
Timer operation Press the TIMER ON button can set the auto-on time of the unit. Press the TIMER OFF button can set the auto-off time of the unit. To set the Auto-on time. ON/OFF SILENCE FP TIMER ON MODE TEMP TIMER OFF FAN SLEEP TURBO SELF CLEAN SWING DIRECT LED FOLLOW ME 1 2 1. Press the TIMER ON button. The remote controller shows TIMER ON, the last Auto-on setting time and the signal "H" will be shown on the LCD display area. Now it is ready to reset the Auto-on time to START the operation. 2.
! CAUTION When you select the timer operation, the remote controller automatically transmits the timer signal to the indoor unit for the specified time. Therefore, keep the remote controller in a location where it can transmit the signal to the indoor unit properly. The effective operation time set by the remote controller for the timer function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.
TIMER OFF (Auto-off Operation) The TIMER OFF feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time. Stop On Set 10 hours later Example: To stop the air conditioner in 10 hours. 1. Press the TIMER OFF button, the last setting of stopping operation time and the signal "H" will show on the display area. 2. Press the TIMER OFF button to display "10H " on the TIMER OFF display of the remote controller. 3.
TIMER ON → TIMER OFF (Off → Start → Stop operation) This feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the house. Start Stop Off Set 2 hours later after setting 5 hours later after setting Example: To start the air conditioner 2 hours after setting, and stop it 5 hours after setting. 1. Press the TIMER ON button. 2. Press the TIMER ON button again to display 2.0H on the TIMER ON display. 3. Press the TIMER OFF button. 4.
Handling the remote controller Location of the remote controller. Use the remote controller within a distance of 8 meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep. 8m CAUTIONS MOD E SWI NG SHO RTC TEM DIR UT P ECT FAN SPE ED TIM ON ER SLE FRE EP SH TIM OFFER SEL TUR F CLE BO AN FOL LED LOW ME RES ET LOC K The air conditioner will not operate if curtains, doors or other materials block the signals from the remote controller to the indoor unit.
Replacing batteries The following cases signify exhausted batteries. Replace old batteries with new ones. Receiving beep is not emitted when a signal is transmitted. Indicator fades away. The remote controller is powed by two dry batteries (R03/LR03X2) housed in the back rear part and protected by a cover. (1) Remove the cover in the rear part of the remote controller. (2) Remove the old batteries and insert the new batteries,placing the(+) and (-) ends correctly. (3) Install the cover back on.
2190 NW 89 Place, Doral, FL 33172 - USA Tel: (305) 594 - 4972 www.klimaire.com Fax (305) 675-2212 sales@klimaire.com The Klimaire logo is a registered Trademark of Klimaire Products inc. Copyright 2016 Klimaire Products Inc.
