Brochure

ManualsBrandsKlipsch ManualsInstallation SoundIC-400-T In-Ceiling Loudspeaker

The all-new IC-400-T packs proven

materials and wide dispersion horn

technology into an installer-friendly,

UL-2043 and 1480 certiﬁed value-priced

loudspeaker with an integrated back can

and multi-tap transformer. IC-T Series

speakers have been included in a num-

ber of major installations nationally, from

Bloomingdale’s in New York City to the

Ron Jon Surf Shop in Orlando.

The two-way IC-400-T features a 5-inch

woofer, and 1-inch titanium diaphragm

compression driver on a 2-inch round

Tractrix

Horn for smooth response with

constant directivity. A Tractrix port design

helps to provide deeper, fuller bass with

less compression and distortion. A new,

more compact design simpliﬁes low ceiling

mounting.

For distributed line applications, the

IC-400-T features a 70/100 volt multi-tap

transformer. A single rotary switch for the

8-ohm bypass and multi-tap setting is

conveniently located under the speaker

grille. The IC-400-T is shipped complete

with a tile bridge for installation in a

suspended ceiling or wherever additional

reinforcement of the ceiling material is

required.

www.klipsch.com

1-800-KLIPSCH

In-Ceiling Loudspeaker

• Wider, shorter design to t low ceilings; multi-tap transformer

• 70-volt, 100-volt, or 8-ohm operation selectable via front

bafﬂe switch

• Tractrix Port design for deep bass with less compression

• Tractrix

Horn tweeter for smooth sound

• Designed to mix and match with Klipsch CA-T speakers

IC-400-T

Frequency response 70-20k Hz +/- 4 dB

Power handling 50 watts (14.5V) cont.

Q 6.3

Sensitivity 86dB 2.83 V/1M

Nominal impedance 8 ohms, min 4.2 ohms when switch is

set to 8 ohm position

Transformer taps 70V: 15W, 7.5W, 3.8W, 1.9W

100V: 15W, 7.5W, 3.8W

Maximum acoustic output 100 dB @ 1M

Coverage angle 80 degrees

Directivity index 8 dB

Transducers 5” woofer and 1” titanium diaphragm

compression driver on a 2” round

Tractrix Horn

Enclosure tuning Vented via a Tractrix port

Input connections Terminal Strip

Thru hole width 9” diameter

Overall width 10.75” diameter

Overall depth 8.313”

Mounting depth 8”

Cutout dimensions 9.125” diameter

Weight 6.25 lbs.

Finishes Black and White

SpecificationS

Summary of content (1 pages)

PAGE 1
In-Ceiling Loudspeaker IC-400-T • Wider, shorter design to fit low ceilings; multi-tap transformer • 70-volt, 100-volt, or 8-ohm operation selectable via front baffle switch • Tractrix Port design for deep bass with less compression • Tractrix® Horn tweeter for smooth sound The all-new IC-400-T packs proven materials and wide dispersion horn technology into an installer-friendly, UL-2043 and 1480 certified value-priced loudspeaker with an integrated back can and multi-tap transformer.