Brochure

CDT-3650-C II
SPECIFICATIONS CDT-3650 - C II
Frequency Response 63Hz-23KHz ± 3dB
Sensitivity 93dB @ 2.83V / 1m
Nominal Impedance 8 ohms compatible
Crossover Frequency 2800Hz
Power Handling 50W RMS / 200W Peak
Recommended Amplifier
Power
100 W
High Frequency Driver 1” (2.54cm) Aluminum diaphragm compression driver
mated to a swiveling 100° round Tractrix® Horn
Low Frequency Driver 6.5" (16.51cm) pivoting IMG cone woofer
Enclosure Material/Type ABS/Infinite baffle, front flush with wall
Wire Gauage Accommodated 12 ga
Diameter 9.5" (24.13cm)
Cutout Dimensions
8.3" (21.08cm)
Mounting Depth
4.5" (13.72cm)
Weight 6.8 lbs. (3.08kg)
Finish White paintable frame and grille
Installation Kit IK-650-C (sold separately)
Fire Rated Enclosure ME-650-C (sold separately)
Built From 2012
UPDATED WITH THE LATEST TECHNOLOGY
The Klipsch CDT-3650-C II maintains the core technology use of a rigid
1” Aluminum compression driver (tweeter) mated to an exclusive
Tractrix® Horn combined with a 6.5” IMG woofer in a 2-way design. Now
with a new low-profile, more elegant grille and refinements to both high
frequency and low frequency reproduction, it continues as a high-perfor-
mance choice for everything from 2-channel music playback to full, large
room surround sound use.
THE UPDATE FOR YOUR EYES: THE NEW SLIMTRIM™ GRILLE
With an all new grille, the visible frame size is reduced by 90% and grill
depth is reduced by 80% over the previous design, for a more edge-to-
edge consistent look that blends in with the wall more attractively. The
new aluminum, paintable, magnetic grille attaches tightly and securely
with ease to virtually eliminate resonant distortion.
KLIPSCH EXCLUSIVE CONTROLLED DISPERSION
TECHNOLOGY® (CDT)
Klipsch horn-loaded technology increases acoustic output while
significantly reducing distortion. Proprietary Controlled Dispersion
Technology allows for both the symmetrical, 100° Tractrix Horn
compression driver (tweeter) and woofer to be independently aimed
toward the main listening area. The tweeter swivels while the woofer
rotates 360° and pivots 15° in any direction. The precisely controlled
dispersion of the horn-loaded tweeter assures that high frequencies are
more effectively directed towards the listening area than typical amiable,
broad dispersion, standard dome tweeters. This, combined with the
woofer’s ability to also direct more narrowly dispersed midbass
frequencies, yields overall sound with more lifelike impact, greater detail
and better vocal clarity.
ALUMINUM DIAPHRAGM COMPRESSION DRIVER (TWEETER) WITH
LINEAR TRAVEL SUSPENSION (LTS)
Combined with the Tractrix Horn, the one-inch stiff, yet lightweight,
metallic diaphragm works in conjunction with a precise phasing plug at
the horn throat to create a very efficient driver with excellent transient
response and lack of distortion. The new Linear Travel Suspension
assures the most precise diaphragm excursion, increasing high-frequen-
cy detail and smoothness.
MACHINE-SPUN IMG WOOFER
The solid Injection Molded Graphite woofer cone has been strengthened
for even more accurate bass reproduction.
TREBLE ATTENTUATION SWITCH
For reduction of high frequency output in challenging install applications such as overly
reflective rooms, allowing for a better frequency balance.
SURE-GRIP MOUNTING DOGS
Provide even pressure against drywall for long-term installation reliability.
COMPATIBLE WITH THE KLIPSCH IK-650-C INSTALL KIT
For increased mounting flexibility and pre-install marking during new construction.
COMPATIBLE WITH THE KLIPSCH ME-650-C FIRE-RATED SPEAKER ENCLOSURE
For meeting building codes and/or reduction of transferred sound between rooms.
All specifications are subject to change without notice.
3502 Woodview Trace Indianapolis, IN 46268 | klipsch.com
©2012 Klipsch Group, Inc. Klipsch is a registered trademark.
A wholly-owned subsidiary of VOXX International Corporation