® CDT Architectural Speakers Owner's Manual
ARCHITECTURAL SPEAKERS IMPORTANT SAFETY INSTRUCTIONS ABOUT YOUR KLIPSCH PURCHASE READ these instructions .. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
4. Insert the speaker assembly into the opening and attach by tightening the four Phillips screws (below). The frame's four "dogs" will swivel out and "sandwich" the wall and frame together as they are tightened. If you use a power tool to tighten these screws, please use a low torque setting. Failure to do so could result in damage to your speaker. 5. Adjust the direction of the speaker by swiveling it to the left or right as needed.
ARCHITECTURAL SPEAKERS Some states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties so the above exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights, which vary from state to state.
ARCH ITECJU HAL SPEAKERS 0 J Klipsche 3502 Woodview Trace Indianapolis, IN 46268 1-800-KLIPSCH • klipsch.