USER MANUAL PREMIERE
REFERENCE (n): 1) the standard, the benchmark, the point used for comparison 2) the embodiment of the legendary Klipsch sound LOUD AND PROUD SINCE 1946 In 1946, Paul W. Klipsch revolutionized the audio industry by creating our proprietary horn technology and the acoustic principles that are the driving force behind our highly acclaimed signature sound. Today, we remain true to PWK’s vision and pack the better part of a century’s worth of sweat and genius into every product we make.
REFERENCE PREMIERE SPEAKERS RP-8060FA RP-600M RP-504C RP-500M RP-8000F RP-400M RP-404C RP-6000F RP-502S RP-600C RP-5000F RP-4000F RP-402S RP-500C RP-500SA RP-400C
BEFORE YOU START Some Klipsch® speakers have feet and other accessories that may need to be installed prior to use. Please refer to Diagrams 1, 2, 3 and 4 for installation.
ROOM PLACEMENT CONNECTION Left and Right Main Channel Speakers — For optimum performance, Klipsch Group, Inc. (KGI) suggests placing your speakers 6 to 15 feet (1.8 to 4.6m) apart. They may also be toed-in slightly for better stereo imaging. The listening position should be about 1 to 1.5 times the distance separating the speakers. Refer to Figures 1 and 3 for connection and placement.
sL sR FIGURE 3 FIGURE 1 STANDARD CONNECTIONS SPEAKER PLACEMENT IN LISTENING AREA SUB SUB 6’ - 15’ SUB SUB TV C TV L R C L R Y X Y X=Y=Z Z Z X sL Front Right Front Left X=Y=Z sR sL sR Optional Side Surround Placement (Option A is preferred) sL sR sL sR FIGURE 2 FIGURE 4 CENTER CHANNEL WALL MOUNTING CAUTION! ABOVE Do not use keyhole for ceiling mounting! VIA KEYHOLE OR OR Front Right Front Right Front Left BELOW #10 2.
REFERENCE PREMIERE WITH DOLBY ATMOS® TECHNOLOGY TV SUB ATMOS FRONT SUB C ATMOS REAR AFL 1 1 AFR SIDE SURROUND RP-8060FA REAR SURROUND RP-500SA RP-500SA º 120 30º - 150º 120º RP-8060FA RP-500SA º90 SUROUND SPEAKER 3 3 SSL OR AFL AFR SSR OR ARL ARR SSL SSR RSL RSR 2 ARL RSL 4 SPEAKER PLACEMENT IN LISTENING AREA 2 ARR 4 RSR
REFERENCE PREMIERE WITH DOLBY ATMOS® TECHNOLOGY CONNECTIONS RECOMMENDED MIN. CROSSOVER: OR MAIN RECEIVER RP-500SA HEIGHT MAIN ELEVATION SPEAKER 150Hz FLOORSTANDING SPEAKER HEIGHT RECEIVER 80Hz HEIGHT RP-8060FA RECOMMENDED MIN. CROSSOVER: MAIN WALL MOUNTING CAUTION! Do not use keyhole for ceiling mounting! The RP-500SA can be added to any passive loudspeaker setup. OR #10 2.
CARE AND CLEANING PRODUCT REGISTRATION The only thing you should ever need to do to your speakers is dust them occasionally. Never apply any abrasive or solvent-based cleaner or any harsh detergent. You can clean the grilles with the brush attachment of a vacuum cleaner. Register your product online at www.klipsch.com/register • Keep up-to-date on new products and promotions. • Your personal information will never be resold. • This registration information is not used for warranty purposes.
3502 WOODVIEW TRACE, INDIANAPOLIS, IN, USA KLIPSCH.COM Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos and the double-D symbol are registered trademarks of Dolby Laboratories. V03 - 180507 1-800-KLIPSCH ©2015 KLIPSCH GROUP, INC. ALL RIGHTS RESERVED. KLIPSCH AND KEEPERS OF THE SOUND ARE REGISTERED TRADEMARKS OF KLIPSCH GROUP, INC. IN THE USA AND OTHER COUNTRIES. A WHOLLY-OWNED SUBSIDIARY OF VOXX INTERNATIONAL CORPORATION. MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES.
RP-400C S P E C I F I C AT I O N S FREQUENCY RESPONSE 65Hz - 25kHz SENSITIVITY 95dB @2.83V / 1m POWER HANDLING (CONT/PEAK) 75W / 300W NOMINAL IMPEDANCE 8 Ohm Compatible CROSSOVER FREQUENCY 1500Hz HIGH FREQUENCY DRIVER 1” Titanium LTS Vented Tweeter with Hybrid Cross-Section Tractrix® Horn LOW FREQUENCY DRIVER Dual 4” Cerametallic Cone Woofers ENCLOSURE MATERIAL MDF ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port INPUTS Single Binding Posts HEIGHT 5.6” (14.