Operation Manual

COMM SAT SPEAKER SPECIFICATIONS

Specifications Subject to Engineering Changes

COMM SAT SPEAKER

BANDWIDTH

120Hz-20kHZ ± 4dB (-10dB @ 42Hz)

POWER HANDLING

70W (15.5V @ 3.2 ohm input)

MAX CONT. SPL

107dB

SENSITIVITY

90dB @ 2.83 volts/1 meter

NOMINAL IMPEDANCE 8 ohms (3.2 ohm minimum @ 5.5Hz)

HIGH FREQUENCY CROSSOVER 4900Hz

DRIVE COMPONENTS Two-way system using one .75" (1.9cm) magnetically shielded, cloth

dome compression driver tweeter with a 90˚ x 40˚ Tractrix

Horn and one

3.5" (8.9cm) magnetically shielded, poly cone woofer

HIGH FREQUENCY HORN 90˚ x 40˚ Tractrix

Horn

SYSTEM CROSSOVER Comm Sat Network Required

INPUT CONNECTORS Pig tail wire attached

ENCLOSURE TYPE Bass reflex via rear-mounted port

ENCLOSURE MATERIAL Stone mineral compound

HEIGHT 7.5" (19.1cm)

WIDTH 4.25" (10.8cm)

DEPTH 6.4" (16.2cm)

WEIGHT 4 lbs. (1.8kg) / each

SHIPPING

WEIGHT

8 lbs. (3.6kg) / pair

FINISH Black or White

MOUNTING Comm Sat Mount (optional)

1 3M, Half-space anechoic

2 AES Standard,

continuous pink noise 50Hz-10kHz,

6dB peaks

3 Calculated at 1M half-space at power handling power input

4 SPL a

t 1M, half-space anechoic with 2.83V input