Brochure

9
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 62 lbs
PART NUMBER
1062011 (Black)
1062012 (White)
1062013 (Raw Birch)
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 157 lbs
PART NUMBER
1060114 (Black)
KI-115-SMA-II SINGLE 15” SUBWOOFER
FREQUENCY RESPONSE
1
(+/- 3 dB)
49 Hz - 200 kHz (-10 dB @ 35 Hz)
POWER HANDLING
2
400 watts (44.7V) | 1600 watts peak
MAXIMUM SPL
3
124 dB Continuous | 130 dB Peak
SENSITIVITY
4
101 dB
NOMINAL IMPEDANCE 8 ohms, minimum 5 ohms @ 39 Hz
COMPONENTS One K-48-ST 15” woofer
INPUT CONNECTION Two point barrier strip
MOUNTING OPTION Four 3/8”-16-threaded ypoints
ENCLOSURE MATERIAL 3/4” 7-ply birch plywood cabinet
HEIGHT 18.5” (46.99cm)
WIDTH 24.6” (62.48cm)
DEPTH 19.2” (48.77cm)
WEIGHT 59 lbs. (26.8kg)
FINISHES Black, White and Raw Birch
KPT-684-SMA DUAL 18” SUBWOOFER
FREQUENCY RESPONSE
1
(+/- 3 dB)
34 Hz - 800Hz (-10 dB @ 25 Hz)
POWER HANDLING
2
600 watts (65V) per woofer | 2400 watts peak per woofer
MAXIMUM SPL
3
132 dB Continuous | 138 dB peak
SENSITIVITY
4
105 dB
NOMINAL IMPEDANCE 8 ohms, 3.6 ohms minimum @ 22Hz | woofers wired in parallel
COMPONENTS Two K-47-EP2 18” woofers
INPUT CONNECTION Four point barrier strip
MOUNTING OPTION Four 3/8” - 16 ypoints on top panel
ENCLOSURE MATERIAL .75” (19mm) 7-ply plywood cabinet | 1” (2.54cm) 9-ply birch plywood motorboard
HEIGHT 48.75” (123.83cm)
WIDTH 23.5” (59.7cm)
DEPTH 30.5” (77.47cm)
WEIGHT 155 lbs. (70.4kg)
FINISHES Black
NOTES:
NOTES:
1 3M, Half-space anechoic
2 AES standard, continuous pink noise, 6dB peaks
3 Calculated at 1M half-space at power handling power input
4 SPL at 1M, half-space anechoic with 2.83 volts input
KLIP-CIRCUIT DRIVER
PROTECTION
To limit potential damage to high and
mid-frequency drivers, all Klipsch KI
Series speakers with internal full-
range, high-current passive crossovers
feature the KLIP-circuit, a proprietary
high-power overload system. When
current to a driver is exceeded it
changes its resistance to a high value
and reduces the current to protect
the driver from damage. When input
is reduced it returns to normal and
allows the driver to play again.
• High power 15” (38.1cm) low frequency
speaker system
• 104 oz. (2.95kg) magnet with 3” (7.62cm)
voice coil for high sensitivity and superior
power handling
• Four suspension points
• Weatherization, stand adapter, handles and
Neutrik
®
NL4 speakONs available as special
order options. Ask for details.
• Dual 18” (45.7cm) cast frame transducers
with 3” voice coils
• 132 dB SPL maximum output
• Extended low frequency response (-3dB,
34Hz, -10dB 25Hz unequalized)
• 4 suspension points