Buyer's Guide

KLIPSCH | CI BUYERS GUIDE 2019-2020
47
FOR THE LASTEST SPECS AND PRICES VISIT KLIPSCH.COM/CUSTOM
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 93 lbs
PART NUMBER
1010649
KW-120-THX 12” PASSIVE SUBWOOFER
FREQUENCY RESPONSE 20 Hz - 200 Hz +/- 3dB
MAX ACOUSTIC OUTPUT 130dB @ 30Hz, 122dB @ 20Hz, 112dB@ 15Hz 1/8 space,
1 meter (2 enclosures side-by-side per THX Ultra2)
AMPLIFIER Use only with KA-1000-THX
NOMINAL IMPEDANCE 8 Ohms Compatible
LOW FREQUENCY DRIVER 12” (30.5cm) front-ring, Cerametallic cone, cast aluminum frame drivers
with a 240oz ceramic magnet structure
ENCLOSURE MATERIAL Medium density berboard (MDF)
ENCLOSURE TYPE Bass reex via front-ring port
INPUTS 1 Speakon NL2 jack and included cable
HEIGHT 20.25” (51.4cm)
WIDTH 17.75” (45.1cm)
DEPTH 17.75” (31.8cm)
WEIGHT 80 lbs (36.3kg)
FINISH Galaxy Black cabinet with Black anodized aluminum fascia
NOTES:
• THX Ultra2 certied passive subwoofer
• Front-ring port
• Top-of-the-line internal wiring
• For use with KA-1000-THX amplier
COMMERCIAL IN-CEILING
The Klipsch Commercial In-Ceiling series of loudspeakers packs proven materials and wide dispersion horn
technology into installer-friendly products. Designed to mix and match with Klipsch CA-T speakers, these IC
speakers have been included in a number of major installations nationally — from Bloomingdale’s in New York
City to Ron Jon Surf Shop in Orlando.
IC-800-T FULL RANGE 8” TWO-WAY IN-CEILING SPEAKER
FREQUENCY RESPONSE 49Hz-20KHz +/- 4dB
SENSITIVITY 92dB @ 2.83V/1 meter
IMPEDANCE 6.5 ohms (in 8 ohm bypass mode)
POWER HANDLING (CONT/PEAK) 100W /400W
HIGH FREQUENCY DRIVER 1” (2.54cm) titanium diaphragm compression driver
LOW FREQUENCY DRIVER 8” (20.32cm) woofer
DIAMETER 9.5” (24.13cm)
CUTOUT DIAMETER 12.625” (32.1cm)
MOUNTING DEPTH 12.75” (32.4cm)
WEIGHT 21 lbs (9.5 kg)
INSTALLATION KIT 061347 (sold separately)
TAP SETTINGS
70V – 100W, 50W, 25W, 12.5W
100V – 100W, 50W, 25W
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 10 kg
22 lbs
PART NUMBER
1062346 (Black)
1062347 (White)
NOTES:
• Tight 75˚ coverage pattern for high
ceiling applications
• 100 watt, low insertion loss, multi-tap
transformer for high output and less
compression
• 70-volt, 100-volt or low impedance
operation selectable via a front bafe
switch